Weber 45 dcoe with choke and racing beat manifold with air cleaner,about 1 year old. Only used for 2months.

Aluminum manifold is very shiny, looks new. Carb finish has faded slightly but is very clean.

Unsure of jetting #'s and choke sizes, was told it was used on streetport 13b, but I don't know that this carb is big enough for such an application.

Correctly tuned it would work great for a stock or mild street port 12a.

I tested this carb on a stock 12a, It idled great but cut out if you stomped the pedal too quickly, but then reved out great.

Do not have throttle linkage accesories, do have omp rod but it is very crude.

You can easily make an omp rod from some brass or aluminum stock from a hobby or hardware store using a brake line bender from a auto parts store. You can also easily make a linkage bracket from aluminum stock from hardware store.

If you want it outfitted for a 12a I can fabricate this stuff for a small fee.



I'll take pictures for serious inquiries with reasonable offers.



Thanks

(western kentucky, usa)

reply via e-mail jorx81@aol.com