i have this stuff listed on another forum also and really need this stuff gone so i can slap my v8 down in my car. i really don't want to have to throw this stuff away and rather sell it to make a few dollars to put towards my swap https://www.nopistons.com/forums/pub...IR#>/smile.png



so here we go. alright today we have:



s4 n/a complete engine with everything {no ac & p.s.}, complete and uncut harness, & motor mounts $400 o.bo. P/U is preffered

s4 tailights $20 obo

s4 n/a guage cluster $30 o.b.o.

n/a ECU $20 o.b.o.

n/a driveshaft for 5spd tranny $25 o.b.o.

n/a radiator $40 o.b.o.

n/a clutch fan $30 o.b.o.

n/a fan shroud $20 o.b.o

n/a radiator hose $10 shipped

n/a stock shifter $10 shipped

s4 n/a 5spd. tranny with pressure plate, clutch, and crossmember $200 o.b.o. P/U is preffered

n/a 5spd. starter $30 o.b.o.

n/a coils & ignitors $30 o.b.o

GXL sunroof skeleton with working motor $40 shipped

GXL red headliner with matching sunroof panel (which is PERFECT) $100 o.b.o

RB header is still pending trade so it may or may not end back up here

Misc. red interior parts also just ask i might have it

i also have the rear carpet and bens that are red also i'll check the condition of it if someone wants it. i have some stuff sitting on it right now.

more to come later possibly



i don't have any pic's as of this moment, but all you have to do is ask and i'll get you some asap https://www.nopistons.com/forums/pub...DIR#>/wink.png



if you have any ?'s just shoot me a pm or post em up here and i'll get back to you as soon as i can. also i'm located in central fl. so if your nearby you can come check some parts if you'd like https://www.nopistons.com/forums/pub...IR#>/smile.png



trades are welcome too



thanks for looking,



-flatz



__________________

opinions are like assholes everyone has one!

bump.



anybody? i'd rather sell it than throw it way.



i'll drop the price of the engine down to $300 or $450 for both the engine and tranny



-flatz

engine and tranny huh? You may just have piqued my interest. I'm short on funds now, but give me a few weeks and I should be able to find a home for that engine. Even a more solid home if you throw in the rear difff and housing too...

definetly the engine & tranny but i can't do the rear diff. and housing just yet. i still need it for the time being. i need the engine and tranny out of there real soon so i can start the fab work to drop the new v8 down in there https://www.nopistons.com/forums/pub...#>/biggrin.png later on down the road i'm eventually going to put the solid rear axle under the rear and get rid of everthing else.



let me know,



-flatz

does the engine run if so i will take it for 3 hundred. thats a great price. im in texas 78245

Could you measure the wear of the clutch disc? Ill take that and the pressure plate off your hands if its good. Measure the depth of the lining at the rivets on either side. There must be more than .3 mm or .012" between the lining and the top of the rivets.

[attachment=39791:attachment]umm lets see, 1st thing 1st https://www.nopistons.com/forums/pub...IR#>/smile.png



gum (LOL, thats definetly a unigue screen name),

yes it runs and runs good. i'll see if i can get you quote here in the next couple days.



mazdaspeed7,

the tranny is still bolted to the engine which is still in the car. i really don't want to seperate the 2 yet till i get someone to buy 1 or the other (or preferrably both) https://www.nopistons.com/forums/pub...DIR#>/cool.png



thanks,



-flatz



heres a pic of it running

LOL, i don't know why the pic of it ended up at the top of my last post, it looks retarded. but anyway thats the pic. of it running

Where in FL are you?

anything on the shipping price yet. 78245. thanks

hey guys i'm really sorry for such a late reply https://www.nopistons.com/forums/pub..._DIR#>/sad.gif but i've been planning this vacation for my family and i for the last year, and it's finally coming together. so i've been really busy making reservations and shopping and getting everthing together. it's just been really hectic, but i can't wait https://www.nopistons.com/forums/pub...#>/biggrin.gif



gum,

i'll get you {and about 6 others) a shipping quote here in the next day or maybe two i promise!. sorry for the wait



osterkraut,

i'm in central fl. in the Cocoa area. if your local you can have 1st shot at anything (sorry guys, local p/u is always welcome 1st. hope you guys understand https://www.nopistons.com/forums/pub...IR )



mazdaspeed,

i have a guy coming to get the tranny this weekend, but if he dosn't show and i already have the tranny out i'll check the clutch disk and pressure plate and get back to ya https://www.nopistons.com/forums/pub...DIR#>/wink.gif



again i'm sorry for the wait but like i said it's been hectic. hope this clears some things up for you guys



-flatz

Thanks, but I already got a clutch.

alright guys, after many pm's i relized i'll have to ship the engine to get it to leave. so today i swung by a fedex after work, and after standing behind some smelly ol lady for which seemed like forever and talking to some idiot behind the counter who didn't know his ******* from a hole in the ground i come to relize this. NO WAY!! it is a HUGE PITA!! not to minchen the freight charges, it's just not worth it!



if someone locally wants it for the $300 they can have at it, but if it's still here by the time i get back from vacation which is from dec 11th to the 18th then it's going to the scrap yard. and i really don't want to see that happen but i don't have the space or any use for it.





-flatz

flatz,



my gf lives in the cocoa area. If you haven't sold the engine, and the header, and maybe some other stuff by thanksgiving break, it'd be no problem for me to swing by.

the engine is still there but the header went on to it's new home sunday as did the transmission. i'm running a halloween special tho. anybody who comes and gets it or pays for it by tomorrow night (halloween) can have the complete engine (as stated above ^), starter, radiator & hoses, clutch fan (with the clutch), and shroud for a low price of $350



now this offer is good until midnight on oct. 31st (halloween night)



cocoa? really? i know almost everyone in cocoa. thats where my car is. whats her name i probably know her? hell, if your going to take it somewhere in cocoa i'll deliver it for free.



let me know man. i'd love to sell it to someone that close https://www.nopistons.com/forums/pub...IR#>/smile.gif that would be great!



-flatz

can u send pics of the taillights, and the passenger side vent that sticks out by the door handle inside the car.. (red interior color)... to v8rx9@yahoo.com



Very interested!!!!!



btw what v8 are you swapping in.. im putting a 350 in mine.

the tailights are faded gray but there not broke. they'd be a good spare set or temp. replacements. as for the vent thing i'll have to look and see b/c i didn't know there was a vent there. i'll take a few pic's tomorrow.



i'm putting a sbc 383 stroker in mine https://www.nopistons.com/forums/pub...#>/biggrin.gif https://www.nopistons.com/forums/pub...1047683473.gif



-flatz

well if u can, get pics of the tailights cuz anything is better then mine right now

my bad dude, i forgot to take the camera with me yesterday https://www.nopistons.com/forums/pub...1047683664.gif i got rained out today so i got sent home this morning and i really didn't want to stand out in the rain 1st thing this morning to try to get some pic.'s



the camera is in my car (the one i drive to work) so i'll definetly snap a couple pic's tomorrow. the black trim is really faded, it looks more like gray trim now https://www.nopistons.com/forums/pub...#>/biggrin.gif but the last time i looked at them i don't remember em being broke anywhere. but thats been a little while b/c i'm hardly ever at the back of the car, i'm normally under it or in the engine compartment https://www.nopistons.com/forums/pub...#>/biggrin.gif



talk to you later,



-flatz

Alright post em up as soon as u can https://www.nopistons.com/forums/pub...IR#>/smile.gif

well i took the a bunch of pic.'s of them today and their actually in really good shape except for the fact that their faded.



now the **** news, i got the pic.'s but i lost the USB cable https://www.nopistons.com/forums/pub...1047683358.gif but it's alright b/c the ol' lady is on her way to the store to get one https://www.nopistons.com/forums/pub...1047683827.gif so i'll have em up here in the next couple hrs (probably sooner)



-flatz

alright now we're in business. hers some pic's. https://www.nopistons.com/forums/pub...IR#>/smile.gif



theres 2 little cracks in the driverside lenses, and i mean LITTLE!! i really had to look for them. if you look really really close you'll see it. other than that and the fading their actually in great shape for being almost 20yrs old https://www.nopistons.com/forums/pub...DIR#>/wink.gif



-flatz

PM'd

pm replied https://www.nopistons.com/forums/pub...DIR#>/wink.gif



-flatz

you guys know what i hate?!?!? i hate it when people ask for pic's then tell ya they want it (whatever it is) and then dissapear after you waisted your time pulling the part and taking pic's for em.. i should start charging people a restocking fee



i think if anybody else wants to play games like this don't even bother replying to this thread or send me pm's. i don't go out looking to waist your guys's time so why waist mine?!?!?!?

i really wish this engine would go so i could get started on the fun stuff, i'd hate to see it get thrown away that would just kill me.



how about $275 for local pick up? c'mon someone save this thing give it a home in your engine bay, don't let it go to the big rotary scrap yard in the sky https://www.nopistons.com/forums/pub..._DIR#>/sad.gif .



-flatz

good news!! the engine may be going to a good home. it's pending sale https://www.nopistons.com/forums/pub...IR#>/smile.gif



-flatz

hey you sold the engine yet? just wondering the thread just stopped!! https://www.nopistons.com/forums/pub...#>/biggrin.gif

sorry i didn't relize i had a fan club https://www.nopistons.com/forums/pub...1047683785.gif i just got tired of posting and feeling like i was talking to myself LOL



but ya, it went on it's way to St. Petersburg this past sunday to live on in someone elses engine bay. i'm so stoked now b/c i can start the fab work for the V8......9's here i come https://www.nopistons.com/forums/pub...1047683473.gif



-flatz