Contents of Rotary Miata conversion kit.







Rotary Miata conversion kit. What's included? you may ask yourself.... We'll here's a very basic draft of

what to look for from the team at Mazsport.



Custom Aluminum Oil Pan

Engine Mounts and custom Brackets

Modified Subframe, on exchange basis.

Transmission subframe, misc brackets, transmission mount

Differential locater

Rear axles

Modified/custom fit Slave cylinder hard-line

Relocated/modified clutch hardline mounting tab





Optional Items that MAY be included (some highly recommended for turbo rotary applications).........................



Modified fuel line



Modified/custom fit brake line(s)



Modified/custom fit Coil mounts



Radiator Brackets

(Radiator must be mounted futher back towards engine to provide enough area for custom (front mount intercooler

pipes to clear) Stock top mount intercooler may be used, but provisions in factory hood must be made. IE: hood scoop must be adapted

to stock Miata hood to provide ample cooling for TMIC.



Optional modified/custom A/C bracket must be installed if A/C unit is going to be left in working order.





I'm sure there are going to be ALOT of questions regarding this Conversion kit. A detailed instruction manual

is going to be released with the kit as well. Please Note: that this kit will require many custom brackets, relitive

level of difficulty is HIGH for an install like this. You will also need access to welding equipment.



At this point, power steering is NOT an option.



Obviously either a turbo rotary engine or N/A rotary engine's can be fitted into the chassis.



We will have more photographs and ALOT more general information to come. price unfourtunatly cannot be discussed over the

forum. Please E-mail me for Price estimates.... ect..ect.



Futher questions may be directly sent VIA E-mail to me at Mazsportparts@hotmail.com





Have a good day gentlemen,

-Markus Reschny

www.mazsport.net



MAZSPORT,INC. 1-800-538-9989 -OR- 727-530-9960 Monday-Friday 8AM-5PM

super! I see this in my driveway within the next 5 years...

i thought for tha most part it was a drop in....i understand custom mounts for engine an tranny but axle changes? y?.....by tha way how much would this kit cost?

Rotary Miata = Sweetness https://www.nopistons.com/forums/pub...#>/BURNOUT.gif

seems like this conversion is for a 13bt engine........ would this also allow a 13b-rew to fit?

does this kit fit the smaller, older miatas too?

Yes the kit fits ALL currently produced and Seen miata's. This included the NA chassis AND NB chassis



For more information give Mazsport a call and Scott will give you the rundown of the kit and the installation information.



MAZSPORT 727-530-9960.



Thanks guys

-Markus Reschny

www.mazsport.net





I WANT TO PAY FOR ADVERTISING!!! lol

13B REW is FDs, correct? if its set up for 13BT, then the engine mounts need to be modified. something along center plate as opposed to rear plate, i believe.

yoiu have an REW@!! cmonnnnnnnnnnnnnnnnnnn

i have a 13B TT... https://www.nopistons.com/forums/pub...IR#>/dunno.gif