Hey Guys,



I've got a bit of a problem, the engine on my B2200 is on its way out (no loss, its a piston...), and I've got a S5 13B kicking around from my 89 GX... Problem is I've only got the RH engine harness (direct to ECU) and the stock ECU...



Do I have a hope in hell in getting it up and running in my truck (not concerned about mounts, etc... thats easy enough). I'm just concerned with making it run (on the cheap) with the stock ECU and what's left of the wiring harness... (also, stripping all emissions https://www.nopistons.com/forums/pub...DIR) ...I still have all of the sensors, and the ignition (coils, etc) but I don't have anything from the other harness (left that in the car :( )



Any help, suggestions, wiring diagrams, or misdirected insults appreciated! https://www.nopistons.com/forums/pub...#>/biggrin.gif



Matt

try looking for a main battery harness for that will get you the plugs for the dizzy and the coils.