I have a mazda BJ wagon like shown below , its a front wheel drive , i was told that is it possible to put a 13b in it , i have seen 13b in front wheel drive cars before like civic , i would like to know how to go about doing this conversion any help would be greatly appreciated





https://upload.wikimedia.org/wikiped...a_Protege5.jpg

A KLZE v6 will bolt in using all OEM mounts/parts. The only difficult part is the EMS. It fits really well too...



https://www.nopistons.com/forums/gal..._239_83747.jpg

https://www.nopistons.com/forums/gal..._239_58448.jpg



Theres no good/easy FWD transmissions you can use with a rotary. The 626 one would be doable, but its a weak transmission. Under 300 whp, its easier to just do a KL or even turbo the original FS and get some decent rods put in the motor. Above that, the trans will be a seriously weak link.

I an ONLY INTRESTED IN A 13B conversion i know its possible jus need some info look at this civic



and i am not looking to go over 250 HP thanks for the info on the transmission though i have heard about it before i jus need to kno what i am getting my self in to before setting the conversion on stone



http://www.youtube.c...atch?v=zsCvrGt5 ... r_embedded

http://www.youtube.c...atch?v=FXGe-rwV ... r_embedded

http://www.youtube.c...atch?v=QrO3kzEa ... r_embedded

http://www.youtube.c...atch?v=zsCvrGt5 ... r_embedded

http://www.youtube.c...atch?v=IuDDKFd8 ... r_embedded