I was thinking about getting a Stage 2 street porting job done. what other mods go alone with street porting, what other mods should be done immediatley after street porting... https://www.nopistons.com/forums/pub...1047683894.gif https://www.nopistons.com/forums/pub...IR#>/boink.gif
|
a rebuild goes along with it ....
|
Originally Posted by vosko' date='Dec 14 2002, 07:15 PM
a rebuild goes along with it ....
|
ouchy stage 2 port you'll get the same fuel mileage as a BIG SUV.
|
you need a full exhaust (headers if na) and then an intake setup (optional)
mike |
about how much would a street port and a rebuild cost?
|
$2000 + housings, rotors, etc if yours are bad generally speaking https://www.nopistons.com/forums/pub...DIR#>/wink.png
|
how much if i buy an a-spec engine and street port it
|
Originally Posted by bigtime' date='Dec 17 2002, 02:20 PM
how much if i buy an a-spec engine and street port it
|
so i should only stage 1 street port it???
https://www.nopistons.com/forums/pub...IR#>/boink.gif https://www.nopistons.com/forums/pub...#>/BURNOUT.gif |
in order to port the engine you have to take it completely apart
mike |
Whose "stages" are you referring to? There are quite a few ways to configure the ports to be classified as a "street port"?
|
the original "street port" templates are the stock 74-75 ports (biggest until the fd), you can go bigger
mike |
Originally Posted by vosko' date='Dec 17 2002, 11:34 AM
its the same price. rebuilding doesn't cost that much as long as rotor housings, side housings, rotors, all that stuff is still reusable. its when you blowup an engine that rebuilding gets expensive!!! mine cost $5000 but everything is new except eshaft and rotors!
|
whats a stage 2 is that like a extend port and is a stage 1 a mild port?
|
All times are GMT -5. The time now is 12:52 AM. |
© 2024 MH Sub I, LLC dba Internet Brands