I wanted to share some feedback on the Rx7parts.com Apex Seals. I've been using these apex seals for about a year now. These seals are designed to warp and not break, therefore not causing any damage to housings, rotors or turbo. I have tested these seals with gas, ethanol and Enzo Racing uses them on his methanol powered Rx7. The 13b World record hold "La Otra" also uses these seals. some are familiar with PFS/Ernie, he is currently using them as well in his yellow FD.



I've started doing engine builds and use them on all cars, street or race. I have not had a single motor come back for any issues. I also pay very close attention to compression after HARD dyno passes and these seals are great. For some reason they were a well kept secret for a while but more and more guys are coming out and stating this is what they are using.



This is probably my first post on these seals, I waited until I was 100% confident in them before I posted. I have asked Roan numerous times to post about them but he wants his customers to post their feedback so here is mine....



These seals are available at http://www.rxparts.com



Anthony

Thanks for the info Anthony, i just emailed him about some of their other stuff as well.

thanks for the feedback.