Anyone have any advice for porting the exhaust with the diffusers in place has anyone simply cut the diffuser or what's my options aside from inserting turbo sleeves...
Thanks Shay |
i had grinded out my old n/a sleeves with a dremel and a carbide cutter bit, the dremel was probably the wrong tool to be using but after time it worked well. basically you just want to have the sleeve fit flush with the port. if you do grind it out remember to wear a mask, eye protection and blow out all of the metal shavings.
|
Cut them. I dont know why so many sites say those are soooo hard. Yes they are hard but they will come out. Just use brain power. https://www.nopistons.com/forums/pub..._DIR#>/dry.png
GregW |
Do the s5's also have the diffuser?
|
yes
|
Anyone know where some pictures are of the finished port... or in progress
Thanks |
once you take out the diffuser its the same port as any of em
https://www.nopistons.com/forums/ind...howtopic=31895 |
All times are GMT -5. The time now is 06:46 PM. |
© 2024 MH Sub I, LLC dba Internet Brands