Haven't posted pictures of any work in awhile and felt like doing so tonight. This motor was originally only going to be ported by me but wound up getting cleaned up and built as well over at my place. This is for Bruce Boulan's '87 FC that was in this past issue of RXTuner. Forgive me for the size of pictures as they weren't taken on my camera. Let me know what you guys think as I always welcome constructive criticism.



Rotors cleaned up with Zep, old bearings removed

http://bdc.cyberosity.com/pictures/B...leanRotors.JPG



Cutting new side seals using Judge Ito's recommendation (thanks Ito)

http://bdc.cyberosity.com/pictures/B...gSideSeals.JPG



Cleaned up gears, new rear main seal, polished main and rotor bearings

http://bdc.cyberosity.com/pictures/B...hBearings2.JPG



Building front rotor

http://bdc.cyberosity.com/pictures/B...an/Rotors1.JPG



Polished bearings

http://bdc.cyberosity.com/pictures/B...edBearings.JPG



B

Front Secondary Intake Port

http://bdc.cyberosity.com/pictures/B...Secondary1.JPG



Rear Secondary Intake Port

http://bdc.cyberosity.com/pictures/B...Secondary1.JPG



http://bdc.cyberosity.com/pictures/B...Secondary2.JPG



Assembly

http://bdc.cyberosity.com/pictures/B...eAssembly1.JPG





B

Is that blood on the second picture? looks scary https://www.nopistons.com/forums/pub...IR#>/smile.png

More Assembly

http://bdc.cyberosity.com/pictures/B...eAssembly5.JPG



http://bdc.cyberosity.com/pictures/B...eAssembly6.JPG



http://bdc.cyberosity.com/pictures/B...eAssembly8.JPG



http://bdc.cyberosity.com/pictures/B...eAssembly9.JPG



http://bdc.cyberosity.com/pictures/B...Assembly10.JPG



Rear iron housing w/ RacingBeat 80-85psi oil pressure regulator

http://bdc.cyberosity.com/pictures/B...Assembly11.JPG



Sandwiched and ready to go!

http://bdc.cyberosity.com/pictures/B...Assembly12.JPG



B

Those rotors look real nice. I'll take your advice on the Zep for future rebuilds. https://www.nopistons.com/forums/pub...IR#>/smile.png



What is the red on the irons during assembly? I've just spread motor oil on them, as the instructions in the manual suggested. It appears that you use something else?

Thanks.



The "red" was Redline Assembly Lube which I ran out of during mid-rebuild. The other clear stuff is Eckerd's brand baby-fresh scented Vaseline aka petroleum jelly. https://www.nopistons.com/forums/pub...DIR#>/wink.png https://www.nopistons.com/forums/pub...DIR#>/cool.png https://www.nopistons.com/forums/pub...1047683329.gif



B

This looks sweet... More pics https://www.nopistons.com/forums/pub...IR#>/smile.png

Thanks Exlex. I don't have many more but I do have a video of it when it was just started today. Bruce popped the motor in this afternoon and fired it up. It doesn't even have 20 miles on it as of this post so all it's doing is idling but you atleast get to hear it up-close.



http://www.idahorotary.com/brapp.wmv



Enjoy.



B

Sweeeeet https://www.nopistons.com/forums/pub...IR#>/smile.png



Hope the enginebreakin goes without any glitches https://www.nopistons.com/forums/pub...#>/biggrin.png

I like all the red hoses in the enginebay.. looks very nice!



GOOD JOB!

the pics aren't working :(