My Rx-3's comeback! NRS Rotorsports and Chip Motorsports on board..
10 Attachment(s)
I decided to try one more time to bring my Rx3 back after 2 accidents in the past. With the help of chip motorsports lapping and nitriding the side housings and Sven over at NRS Ceramic Power Seals delivering ceramic apex seals. Chip motorsports delivered top quality work of lapping and nitriding the plates, NRS Rotorsports Delivered top quality ceramic apex seals. this time around I will not use nitrous oxide(car was all over the road with NOS) I will concentrate on ALL MOTOR. I'll be testing methanol fuel and pushing the all motor set-up to the limits.. goal is 350rwhp.. ..
specs.. series 6 engine.. bridgeport/partial p-port s5 NA. rotors Rx8 e-shaft chip motorsports lapping and nitriding NRS Rotorsports 2mm one piece ceramic apex seals. |
Re: My Rx-3's comeback! NRS Rotorsports and Chip Motorsports on board..
10 Attachment(s)
engine build..
|
Re: My Rx-3's comeback! NRS Rotorsports and Chip Motorsports on board..
2 Attachment(s)
I would also like to thank Goopy performance.. enjoy the pics
|
Re: My Rx-3's comeback! NRS Rotorsports and Chip Motorsports on board..
So happy to here this! You re the ONE I read and studied the most from when I got into the game! Thanks for getting your rx3 back on the track! I know your going to kill the All Motor class!
|
Re: My Rx-3's comeback! NRS Rotorsports and Chip Motorsports on board..
Wow, nice! There aren't that many RX-3 around now, it's always amazing to see and get updates from those who are bringing back the classics.
|
Re: My Rx-3's comeback! NRS Rotorsports and Chip Motorsports on board..
4 Attachment(s)
progress..
|
Re: My Rx-3's comeback! NRS Rotorsports and Chip Motorsports on board..
short vid of first start up.. engine sounds strong.. dyno will come soon..
|
Re: My Rx-3's comeback! NRS Rotorsports and Chip Motorsports on board..
2 Attachment(s)
about a week away from going to the dyno..
|
Re: My Rx-3's comeback! NRS Rotorsports and Chip Motorsports on board..
:thumbsup:
|
Re: My Rx-3's comeback! NRS Rotorsports and Chip Motorsports on board..
Originally Posted by Judge Ito
(Post 854616)
progress..
Try a Wix filter from NAPA with a 350 to 500 pound burst can, or a K&N filter with a 500 pound burst can. Also much more media surface than any Fram. Lynn E. Hanover |
Re: My Rx-3's comeback! NRS Rotorsports and Chip Motorsports on board..
Originally Posted by Lynn E. Hanover
(Post 854669)
Friends don't let friends buy Fram filters for any reason.
Try a Wix filter from NAPA with a 350 to 500 pound burst can, or a K&N filter with a 500 pound burst can. Also much more media surface than any Fram. Lynn E. Hanover |
Re: My Rx-3's comeback! NRS Rotorsports and Chip Motorsports on board..
DYNO DYNO DYNO DYNO DYNO!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!! :p
|
Re: My Rx-3's comeback! NRS Rotorsports and Chip Motorsports on board..
2 Attachment(s)
Full Function Engineering came on board. FFE is a great company. great products. I've been buying and selling their products ever since I came back into business.(almost 2 years already) Here I'm using FFE series 6 trigger kit with the hall effect sensor.. enjoy
|
Re: My Rx-3's comeback! NRS Rotorsports and Chip Motorsports on board..
1 Attachment(s)
Update.. Working hard to get it done..
|
Re: My Rx-3's comeback! NRS Rotorsports and Chip Motorsports on board..
Good to hear!!
|
Re: My Rx-3's comeback! NRS Rotorsports and Chip Motorsports on board..
2 Attachment(s)
Paint.. And airbrush work..
|
Re: My Rx-3's comeback! NRS Rotorsports and Chip Motorsports on board..
2 Attachment(s)
Paint..
|
Re: My Rx-3's comeback! NRS Rotorsports and Chip Motorsports on board..
2 Attachment(s)
..
|
Re: My Rx-3's comeback! NRS Rotorsports and Chip Motorsports on board..
5 Attachment(s)
Air brush done..
|
Re: My Rx-3's comeback! NRS Rotorsports and Chip Motorsports on board..
2 Attachment(s)
..
|
Re: My Rx-3's comeback! NRS Rotorsports and Chip Motorsports on board..
That's one nice RX-3
|
Re: My Rx-3's comeback! NRS Rotorsports and Chip Motorsports on board..
|
Re: My Rx-3's comeback! NRS Rotorsports and Chip Motorsports on board..
|
Re: My Rx-3's comeback! NRS Rotorsports and Chip Motorsports on board..
|
Re: My Rx-3's comeback! NRS Rotorsports and Chip Motorsports on board..
Hey Judge,
Glad to see you're still doing your thing. Car looks great! I haven't been up that side for quite a while, but next time I come home, hopefully I can come check you out. Hope all is well. |
All times are GMT -5. The time now is 08:15 PM. |
© 2024 MH Sub I, LLC dba Internet Brands