HI, i just swap my first engine with one i got from the wreckers now it wont start , it tries to turn over but wont catch i get no spark at the plugs but i havent changed the coil/ingniters or wire and plugs.......im not sure if i left something out with the wiring or miss placed something under the dash. i have an 86 na the new motor has compression and thats what i was praying for and no leaks so far but the damn thing wont turn over.hmmmmmmmm im not sure how to properly check the resistance in the coil, i kow where to check but i dont know how to use a multimeter correctly, all help is appreciated....





thanks

did you ever remove the crank angle sensor? i know many people that have removed them and replaced them incorrectly experience the same thing you're describing ... then they take it out and put it back in and the car fires up in one shot. just a thought ....

Hi fellas got it figured out. Check the wiring under the dash now it runs but sputters and over heats...any ideas. I still need to do the timing and replace sensors. Also is there a proper way to ensure there is no air in the coolant system.







Thanks...