i have a 1984 GSL SE and we just replaced the engine with a 13b from a 1991. the swap was relatively easy but we have run into problems with the ignition. the car is at the point where it is ready to go for inspection after much work, however we aren't getting any spark. any suggestions on this would be helpful please.



if you are interested in seeing what the car looks like check out the website for it at http://gslsepa.tripod.com/rx7/rx7.html

Try in the first gen section.

Check and see if the coils have power going to them. Check your rotor button and the points in the dizzy.