I am just wondering how many people out there have rebuilt there own engines? I have done a few and would rather due it myself, but some people are not that way. I learned alot from doing it myself, something you don't get letting someone else do it for you.
|
i do mine, its something id rather do myself too, i have bad luck about letting other people build motors, for some reason it takes like 5 years when i dont to it
mike |
You also don't know what they really replace untill it is to late..... https://www.nopistons.com/forums/pub...IR#>/angry.png
|
Originally Posted by toddp31' date='Jun 11 2003, 09:20 AM
You also don't know what they really replace untill it is to late..... https://www.nopistons.com/forums/pub...IR#>/angry.png
mike |
I rebuilt my first engine a few weeks ago. It was a 13B 4 port. My next engine may be a 20B. I'll just see how the MMO treatment works out.
|
I did mine myself.
|
I always build my own motors, and do my own porting too. After one bad experience, I dont trust anyone to do my motor for me...
|
If shops will cut corners if they can get away with it! I think that bad shop rebuilds have killed more Rx7's than anything else!
|
I did mine...
|
I though there would be alot more people than this by now......
|
Originally Posted by toddp31' date='Jun 12 2003, 10:30 AM
I though there would be alot more people than this by now......
mike |
I've done rotary speedster's engine and my own. I'd rather not pay someone to put their dickbeaters all over my wankel.
|
I did mine for the Repu.. And will probably do the Vert one next year..
I would not pay to have someone play with my wankle.. I can do that myself.. |
Originally Posted by Silver Ninety Three' date='Jun 11 2003, 04:02 PM
I did mine myself.
|
i did mine my self (learned the hardway) https://www.nopistons.com/forums/pub...IR#>/wacko.png
|
I wish I was smart enough to rebuild my own engine.. my n/a may need one.. but I've thoght about selling her..
|
It really isn't that hard, if you have any mechanical skills that is.... I love side seals! The people that have done it know what I mean
|
Originally Posted by vosko' date='Jun 13 2003, 07:23 PM
after 3 KDR engines lol
|
hey i'm thinking about geting another engine and rebuilding the one i have in my car. about how long would it take and the cost. also is there a website where i could get a good rebuild kit . n/a
|
Originally Posted by Silver Ninety Three' date='Jun 17 2003, 12:34 PM
I've never had a build related failure from KDR. It was always from tuning.
|
I tried over the winter... I wouldn't call it a rebuild. The only thing new was a $120 gasket set. EVERYTHING else was pieced together from 3 blown 12A's. The finished product has LOW compression and sounds like it wants to start... I'll pull it apart again... I BET the next time I get it to run... I've learned SOOOOOO much since then.
|
so did everyone buy rebuild kits or specific parts from dealer?
|
I havent rebuilt one yet....
but my dads third gen is loosing water somewhere so im guessing i might be having a go soon, it cant be that hard.... can it? |
Originally Posted by BigTurbo74' date='Jun 17 2003, 11:21 PM
so did everyone buy rebuild kits or specific parts from dealer?
mike |
All times are GMT -5. The time now is 05:11 PM. |
© 2024 MH Sub I, LLC dba Internet Brands