|
Ok diffusers are out already now i need to port them, pics coming in a minute. need help on port size and shape
|
|
what now? lol
|
here are the pics after porting, templates were not used, free hand
https://i115.photobucket.com/albums/...330/img039.jpg https://i115.photobucket.com/albums/...330/img040.jpg https://i115.photobucket.com/albums/...330/img041.jpg https://i115.photobucket.com/albums/...330/img042.jpg what do you guys think??? |
Well??? What do you think???
|
I say square the port off more at the top and work the bevel edges to flow characteristics and seal life. The scribe looked like a good port shape. Should be a nice exhaust port.
That port has allot of overlap you might want to not take allot out of the intake ports with this one. |
Over lap is not a concern for me, since the motor is bridge port.
My bevel is not good? WHy square off the port? |
Originally Posted by iceblue' post='864099' date='Mar 18 2007, 08:05 AM
I say square the port off more at the top and work the bevel edges to flow characteristics and seal life. The scribe looked like a good port shape. Should be a nice exhaust port. That port has allot of overlap you might want to not take allot out of the intake ports with this one. Read the tech section about exhaust porting on Paul Yaw's website. WWW.yawpower.com Lynn E. Hanover |
Originally Posted by Lynn E. Hanover' post='864117' date='Mar 18 2007, 12:53 PM
|
Originally Posted by Lynn E. Hanover' post='864117' date='Mar 18 2007, 12:53 PM
Thank you Lynn https://www.nopistons.com/forums/pub...#>/bowdown.gif Im just a bit afraid of hitting the water passage. |
| All times are GMT -5. The time now is 04:53 PM. |
© 2024 MH Sub I, LLC dba Internet Brands