NoPistons -Mazda Rx7 & Rx8 Rotary Forum

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)

- Rotary Engine Building, Porting & Swaps (https://www.nopistons.com/rotary-engine-building-porting-swaps-55/)

- - Block Off Plates (https://www.nopistons.com/rotary-engine-building-porting-swaps-55/block-off-plates-22482/)

joes95rx7

08-10-2003 11:07 PM

1 Attachment(s)

How did I do on my home made block off plates?

joes95rx7

08-10-2003 11:11 PM

1 Attachment(s)

What else can I block off?

dr0x	08-10-2003 11:22 PM

10000x better than mine https://www.nopistons.com/forums/pub...IR#>/smile.png But it looks like you actually put work into them... hehe. I used a hack saw to cut mine from 1/8 aluminum and then a file to dull the edges. https://www.nopistons.com/forums/pub...1047683329.gif

banzaitoyota

08-11-2003 07:23 AM

nice job.

jspecracer7

08-11-2003 09:01 AM

If you block off the ACV, you don't need to block off the other two...I only have the ACV blocked off and have had no problems. IF they needed to be blocked off, I'd have one hell of a vacuum leak https://www.nopistons.com/forums/pub...IR#>/blink.png

dr0x	08-11-2003 08:42 PM

IMO it looks better with it all blocked rather than big holes in the manifold.

pk797

08-13-2003 10:17 AM

True that...

Jeff20B

08-13-2003 03:25 PM

I need to make some of those today.

All times are GMT -5. The time now is 06:05 AM.