Ok I bought a blown TII engine
I opened it up 1 housing was damaged the other was good and the rotors have no damage except all the seals have collapsed i.e there all the way in on the grooves I cleaned the rotors(big time "dry" crode all over) got 1 apex seal loose and used that with a small hammer to push the others off had to use a flat screwdriver to push the corner seals to the side and then use the apex seal and hammer to get them off Now the side seals! How the hell do I those off? do I need a jewlers flat screw driver of something or should I soke them in engine cleaning ACID? |
did it have water in it? sometimes you can push side seals to the side
mike |
soak them overnight in Varsol or simple green. Either one will loosen the carbon.
|
All times are GMT -5. The time now is 04:28 AM. |
© 2024 MH Sub I, LLC dba Internet Brands