NoPistons -Mazda Rx7 & Rx8 Rotary Forum

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)
-   Rotary Engine Building, Porting & Swaps (https://www.nopistons.com/rotary-engine-building-porting-swaps-55/)
-   -   48ida venturi question (https://www.nopistons.com/rotary-engine-building-porting-swaps-55/48ida-venturi-question-69852/)

j9fd3s 05-24-2008 04:15 PM

so lets say i have the engine in the competition prep manual, and i'm starting with a 48 weber, jetted like they have in the comp manual, which uses a 42mm venturi.



if i go to a 38mm venturi, which is 20% smaller, does it run richer? 20% richer?



i'm thinking 38mm might be good for break in, and smogging the thing

Lynn E. Hanover 05-24-2008 09:30 PM


Originally Posted by j9fd3s' post='900955' date='May 24 2008, 02:15 PM
so lets say i have the engine in the competition prep manual, and i'm starting with a 48 weber, jetted like they have in the comp manual, which uses a 42mm venturi.



if i go to a 38mm venturi, which is 20% smaller, does it run richer? 20% richer?



i'm thinking 38mm might be good for break in, and smogging the thing



The carb will run richer with the smaller choke size.



With a 36MM choke I run a 210 main 80 air F-7 tube. There is a lot of stuff to change for road racing.



Not much on the street.



Lynn E. Hanover

j9fd3s 05-24-2008 09:51 PM

think a PP engine will pass smog on alcohol?


All times are GMT -5. The time now is 07:55 AM.


© 2024 MH Sub I, LLC dba Internet Brands