my kid sierra has gone twice to the track and managed to go 14.4 @97mph we learned later the car would no hold more then 4lbs of boost on the dyno. car has a serious boost leak. goal for this car is 12lbs of boost.
mods are: streetport engine cleaned,balanced and calibrated primary injectors and resized secondary injectors walbro255 fuel pump bronze clutch 3inch downpipe fuel cut defenser thats about it. this car is using a series 4 engine and everything else series 5. |
at the track..
|
you could follow her build at the shops facebook page.. advanced rotary performance somewhere in fb somehow the fb page is hard to find.
|
I have some youtube vids but i can't find a way to post them..i'll keep updating her progress...
|
Originally Posted by Judge Ito
(Post 849401)
you could follow her build at the shops facebook page.. advanced rotary performance somewhere in fb somehow the fb page is hard to find.
|
Wow. That's not too shabby. What tires is she running? Any wheel hop?
|
|
Originally Posted by 1988RedT2
(Post 849411)
Wow. That's not too shabby. What tires is she running? Any wheel hop?
tires are kuhmo 225/50/16 |
It's not a fan page it's an actual page for the shop. Do a search (of everyone not pages) of "arp shop"
|
|
|
the dyno runs.. 3 to 4 psi and 10.0 Air fuel ratios.. 210rwhp
http://www.youtube.com/watch?v=MvgzO...eature=related |
|
hi judge ito san i have been reading up on your porting school threadsand others with much admiration with the quality workmanship and power outputs that your achiving i myself has been building and racing rotary powered cars here in new zealand for te last 15 p.lus years im very intrested to try some of your ports in my new race motor that im preparing f or my gen 3 curcuit car we as a rule have never run ports with radical port timing as you we tend to u se the trusted racebeat templating withabove average results and reliability i see that most of your motorsport is drag racing would your radical ports suit curcuit racing is there any chance we could get some diamensions or templates so we can try them
|
update on Sierra's Rx-7, i fixed the boost leak and dynoed the car at 9psi. car made 280rwhp, anything over 9psi and it would lean out real bad so i kept it at 9lbs of boost. we took the car to our local race track and she ran 13.0@104mph with a 1.7 60ft mark
http://www.youtube.com/watch?v=Tzoje...er_profilepage |
2 Attachment(s)
|
on the 13.0 run the clutch went bad. soon ill replace it and back to the track. ill keep updates coming. 12's are the goal
|
1 Attachment(s)
|
1 Attachment(s)
|
here is a video of her 12.8 run, the loud noise behind her was a rotary powered toyota starlet also testing that day.. on this run you could see how she over revved it,(between 2nd gear and 3rd gear) hitting the rev limiter and slowing the car down. this Rx-7 has more in it.
http://www.youtube.com/watch?v=R2L2Uvsv5SA |
1 Attachment(s)
|
Sierra runs 12.6 and older sister Loren runs 12.4, both were running the same car. this is Sierra's 12.6 run, uploading lorens 12.4 soon.. enjoy..
http://www.youtube.com/watch?v=EDTo0_jWMh8 |
1 Attachment(s)
In this pic to the right is my Kid Loren and I talking about her 12.4 run. Sierra is to Loren's right side walking up. Loren is telling me the car has a 12.3 in it..
Attachment 16209 |
|
|
Very cool thread! https://www.nopistons.com/forums/pub...IR#>/smile.png
|
Re: my 3rd kid Sierra in her series 5 turbo II(UPDATE, 12.4@109mph)
Hey what track is that? I usually go to englishtown
|
Re: my 3rd kid Sierra in her series 5 turbo II(UPDATE, 12.4@109mph)
Originally Posted by AzulNinja
(Post 852938)
Hey what track is that? I usually go to englishtown
|
All times are GMT -5. The time now is 12:28 PM. |
© 2024 MH Sub I, LLC dba Internet Brands