i'm doing a 1st gen. rx7 turbo 2 swap and rerunning the lines -6 all the way from the tank to the motor and back and doing a parellel setup for the fuel rails. i have a walbro 255 pump and was wandering if it would be enough for around 12 to maybe 15 psi? or how much boost can i run with this setup? im also running a microtoech to control everything.

that should be fine but i wouldnt recommend raising the boost until you upgrade your secondaries but wityh the standalone u should be abled to find out when u get it tuned also the stock turbo is not really efficant past 12 lbs but i could be wrong id let someone else chime in

well i have a t60-1 turbo and 4 800cc injectors for the setup right now with a streetport intake and exhaust. i was just worried if maybe the pump wouldnt be enough for 15+psi if i wanted to tune for it. this is my first time doing a setup like this on a 1st gen..

oh **** wory u didnt mention any of that fun stuff

yea my bad im doing something a little bit different here. im running water/meth. injection for cooling the charge no intercooler. this is all pretty new to me. ive done turbo 2s before but not with my upgrades and also not in a first gen.. thats why i ask.