This is one of the services I provide for FC3S (13B and 20B) owners. I've been modifying throttle bodies for the FC for quite awhile now on the TeamFC3S forum (about a year), but since I'm new to this forum, I thought I'd post some of my work on them. This modification *greatly* improves throttle response, low-range power, and mid-range power with slight gains on the high-end. Especially helpful for larger turbocharged 13B's.



http://bdc.genxracing.com/ThrottleBody/TimFulton1.Jpg



http://bdc.genxracing.com/ThrottleBody/TimFulton2.Jpg



http://bdc.genxracing.com/ThrottleBody/TimFulton3.Jpg



B

what do you charge for that service?

$150 plus shipping.



B

Thats alot of dough for a dremel polished tb, i could do that myself for $.30, I would sooner buy a water injection kit and up the boost past 16 on pump, and smoke your throttle body.

You get what you pay for, Suds. It definitely costs more than 30 cents in parts and materials to do what I do. Go ahead and try it yourself and see if you can do that job as well as the one I do.



What's this about 'smoking my throttle body'? Are you even familiar with what I do or familiar with the cars I've setup (and what they run)? Your sarcastic reply isn't necessary, friend; I haven't done or said anything to warrant it.



Please post some of the details of your setup including what the car has run down the track. While you're looking, I'll show you some of mine.



http://bdc.genxracing.com/bdc_033000_3_SAE.jpg



-- Done on pump gas, street ported Series 4 motor running 8.5:1 rotors, with standard spark plugs, using a 60-1 HIFI turbo at 15psi of boost, and without any other power adders like nitrous oxide.



http://bdc.genxracing.com/DynosandTi...e_040600_4.jpg



-- Street tires, full street trim and pump gas (drove the car to the track like this), running 15psi of boost. Homebuilt.



Regards,



B

Brian, that guy is just jealous, I wouldnt trip over him. Thanks for your Haltech help!



Jim Kelly

somebody just got...... https://www.nopistons.com/forums/pub...1047683637.gif



thats some impressive numbers bro.

I'm not trying to start a fight; just setting the record straight in that I'm not a guy who doesn't have a clue about how this stuff works nor am I someone who's interested in peddling crap to the Rx7 community. My work is top-notch and anyone's who's got anything I've got will vouch for it. $150 for a TB job like that is on the conservative side considering the amount of labour (in hours) it takes to perform it from start to finish. I'm not sure why Suds got on my case but I hope I can garner some respect from him in the future.



Thanks, by the way dvl7, on the compliment. https://www.nopistons.com/forums/pub...IR#>/smile.png



B

hahah bdc u can look forward to my throttle body coming your way.

Alright, I will bust out my ****.



First off, i am 16 years old, let me just get that outta the way, because I know your homebuilt car wasn't home built when you were 16 years old like mine was.



I have a similar setup to you, my car is in the nopistons 'garage'. I don't have any dyno sheets, and i don't have any track times, but then i don't really need to show off, my car beats the people that i want it to beat.



The reason i bashed your tb is because on forced induction applications the turbo will breathe right on past the efficiency range of the intake manifold/tb design, especially a t4 turbo. So it isn't really worth the $150 for the gains that you get. I am sure they are minimal, unless of course you have a before and after dyno showing gains on your t4 powered car. Then my interest would be piqued. I apologize i should have kept my opinions to myself.