hey i just got my diffuser in and i didn't get no kind of instructions. can anyone help me with how I am suppose to bolt this thing on. do i need to drill holes or something like that? please... it's killing me just staring at it everyday. thanks.

hmm lemme see...



first you have to take the rear oem plastic piece.. the piece under the bumper cover.. or you can keep it and cut it to fit the diffuser...



for the sides of the diffuser, get license plate holders and pop the clip in and use stainless steel screws w/ washers... (bracket to bumper)



then for the bracket to diffuser.. use 10mm bolts/nuts and washers.. (stainless to connect... 3 on each side...



for the center rear.. use a SS bolt washer and nut right in the middle.. you have to drill here.. or use a long SS screw w/ washer



for the front.. you can use the 2 existing nuts to attach the brackets to the body and 2 10mm bolts for the bracket to the diffuser...



depending on your exhaust.. you may need to shave a little to clear the pipe and can..

I'm thinkin of going wingless with the difusser. Like this...

hey thanks for the help. lets see if i can do this.

yeah that's probably what i'll do, i like the wingless look too.

bump