So i got some feed fenders and feed bumper, and i am trying to take off the stock fenders but they are being a bhitch, i got alot of bolts off of them, i took bolts off the the under the hood, in the wheel well, from inside teh dorr, i took the head light covers off and removed some from under there too. There seems to be one more bolt holding in on, and it appers to be attached to the front bumper.

So my main question is

Do i have to take the front bumper off to remove the fenders?

Any suggestions on how to get the feed fenders on smoothly, thanks for your help

-Noah

also i've been on www.scuderiaciriani.com they don't have precuders on just fender removal, i got some front bumper removal info from there though

-Noah

Blowtorch..... https://www.nopistons.com/forums/pub...#>/biggrin.png

I really don't know the answer to your question but ...



Since you've got new fenders and a new front bumper why don't you just take out the old one and see what happens?



Take Care

there are three little nuts on each side of the front bumber that attach to the fendor underneath the headlights. did you get those?

there are 1 or 2 bolts right by the door, a bunch underneath, a like 3 on top, and then there are like 4 nuts that go onto bolts attached to the front bumper. as far as i can tell you need to pull the bumper off at least far enough to pull those bolts out of the holes from the fender so you can pull the fender off sideways. wish i had pics to explain better but as far as i know there isnt a way to undo the bolts from inside the fender and just pull them out individually

youve most likely missed this bolt...

sweet i just got the fenders and front bumper off, that one nut was a bitch.

now to get the feed stuff on , this should be fun.

thanks --Noah