Curious as to how all of you retain cruise control after installation of an aftermarket steering wheel?



I want a Momo wheel, but don't want to lose CC. I use is at night when the cops around here will pull you over for 4 mph over.







TIA!

Sinful7

If you obtain the Mazdaspeed hub, it has the plug for the cruise control and eliminates the airbag light flashing as well.

Michel

reeeeeeaaaally... That's VERY interesting. Ideas on how to get it??

I have the Momo millenium and I have a hub that eliminated the light but I did not allow me to keep the cruise control. I actually like it out anyway. I never used the damn thing. I took the whole thing out of the engine bay and all.





Hi Michel, welcome to the faster loading forum.



Do you remeber meeting Rikki and me at MADS two years ago.

I had a montego back then and was offering you allen head bolts?

Seems funny to me now. https://www.nopistons.com/forums/pub...#>/biggrin.png



Any who..

i have a stock 97 momo wheel.... no airbag https://www.nopistons.com/forums/pub...DIR#>/wink.png

I always use my CC. that's the problem. BTW, I checked on the Mazdaspeed hub, they are no longer available. Do'h!

BACK FROM THE DEAD!!!



Can someone direct me to a MOMO - compatible hub for the FD that has horn-ability? Quick release is a plus!!

I've seen on a Supra , I think it was an HKS hub that retained the cruise control, the cruise buttons were on the top of the hub, really trick, they may have one for the rexes as well not sure



Sinful7, if you just use a normal momo hub one that is for an FD you have to make the horn work by attaching a piece of soft metal that touches the back of the hub, metal then attaches to the horn wire, the reason is that is the horn wire is all attached to the clock spring for the SRS unit on the stock wheel

something that im thinkin of doin also............ since my airbag deployed, and its an extra 1g to get air bag back....... i was lookin at sparco though...... cuz they have the lil red buttons for the horn

If you need, I'll try to get the box to my hub for the Part number, cause if I remember there might not be a listing for fd's,

let me know if you need it

Don't feel too bad... the Mazdaspeed hub does NOT address the Cruise control. I have one and my CC is disactivated because the control buttons are sitting in a box along with the original steering wheel.



David

Get a Mazdaspeed Hub through Corksport or JT Impoerts. That will take care of your horn and airbag problems. You'll have to fabricate a doughnut with a wing to hold the cruise control module close to the new wheel spoke. Not difficult. I have the Mazdaspeed D-cut steering wheel w CC. Good luck.

If you need, I'll try to get the box to my hub for the Part number, cause if I remember there might not be a listing for fd's,

let me know if you need it [/quote]

Could you please??

Do you have a picture of the installed goods?? Also, is the Mazdaspeed hub compatible with MOMO steering wheels?

yes the hubs are compatable.



Cruise control blows man, scrap it! :bigthumg:

If you need, I'll try to get the box to my hub for the Part number, cause if I remember there might not be a listing for fd's,

let me know if you need it [/quote]

Could you please?? [/quote]

ok I got the number from the hub box hope it helps you out



pn 12115115705



was purchase thru Exotic Motoring in Toronto (which probably would not help you out)

Woah! Thanks brotha!





That was fast.

no probs

Mazda speed hub is nla has been for over a year. corksport is nla also. mazda speed america nla. use the momo hub second gen. good article on miata.com for install ,miata wheel works with airbag if you like the style ,kinda looks like the 96 RZ factory momo wheel.