NoPistons -Mazda Rx7 & Rx8 Rotary Forum

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)
-   Insert BS here (https://www.nopistons.com/insert-bs-here-12/)
-   -   nobody posting today (https://www.nopistons.com/insert-bs-here-12/nobody-posting-today-3883/)

vosko 07-20-2002 01:03 PM
i guess everyone has stuff to do today https://www.nopistons.com/forums/pub...DIR#>/wink.png

turborotor 07-20-2002 01:04 PM
They have a life big V. We don't :(

Rotarydragon 07-20-2002 01:10 PM
I'm posting. I don't have a life. Or a job. Or a turbo.

OKIERX-7 07-20-2002 01:22 PM
HaHa, try this on for size. I'm pulled my dash off early this morning to see why my A/C blower wasn't working. So turns out that the stupid j-spec turbo harness I bought doesn't have plugs for A/C, cruise control, or wipers. So now I am rewiring the harness with plugs and wires from my old NA harness, while cross-refrencing the NA and turbo ECU wiring diagrams to make the right connections. Well I'm halfway done and tired so I decide to start drinking and plan to pass out about 6-7 pm. https://www.nopistons.com/forums/pub...IR



But, I might go see Austin Powers or K-19 tonight then pass out.

vosko 07-20-2002 01:36 PM
sounds like fun https://www.nopistons.com/forums/pub...DIR#>/wink.png

OKIERX-7 07-20-2002 01:41 PM
Originally Posted by vosko' date='Jul 20 2002, 01:36 PM
don't patronize me https://www.nopistons.com/forums/pub...#>/biggrin.png It sounds like ASS! https://www.nopistons.com/forums/pub...DIR#>/moon.gif

89 Rag 07-20-2002 01:52 PM
I finished fixin my harness last night, what a giant pain in the ass. I should have hired it out. just takin a break from puttin my engine/trans in, way easier job when the two go in bolted together.

vosko 07-20-2002 01:56 PM
hooking the harness up is easy..... the rest of it gets tricky

OKIERX-7 07-20-2002 02:06 PM
Originally Posted by vosko' date='Jul 20 2002, 01:56 PM
hooking the harness up is easy..... the rest of it gets tricky
Working out all the bugs on a car that wasn't designed for the engine, in a part of the country where there is NO rotary help for 200 miles, has been the trickiest part. God forgive me, but if I'd of known it was going to cost me as much and been as hard as it was I'd probably just bought a Z-28. On the other hand, I really like feeling like a rotary god! :P



Plus, thanks to everyone who has been kind enough to help me online, you know who you are.

vosko 07-20-2002 02:08 PM
i've been there. not as bad as you though!

OKIERX-7 07-20-2002 02:21 PM
Originally Posted by vosko' date='Jul 20 2002, 02:08 PM
i've been there. not as bad as you though!
Yeah, I feel like a martyr.

Rotarydragon 07-20-2002 02:21 PM
Originally Posted by OKIERX-7' date='Jul 20 2002, 10:06 PM
[quote name='vosko' date='Jul 20 2002, 01:56 PM']hooking the harness up is easy..... the rest of it gets tricky
Working out all the bugs on a car that wasn't designed for the engine, in a part of the country where there is NO rotary help for 200 miles, has been the trickiest part. God forgive me, but if I'd of known it was going to cost me as much and been as hard as it was I'd probably just bought a Z-28. On the other hand, I really like feeling like a rotary god! :P



Plus, thanks to everyone who has been kind enough to help me online, you know who you are.[/quote]

You're welcome, I know you couldn't have gotten it all done without my sage advice.



https://www.nopistons.com/forums/pub...1047683785.gif

OKIERX-7 07-20-2002 02:26 PM
Originally Posted by Rotarydragon' date='Jul 20 2002, 02:21 PM
[quote name='OKIERX-7' date='Jul 20 2002, 10:06 PM'][quote name='vosko' date='Jul 20 2002, 01:56 PM']hooking the harness up is easy..... the rest of it gets tricky
Working out all the bugs on a car that wasn't designed for the engine, in a part of the country where there is NO rotary help for 200 miles, has been the trickiest part. God forgive me, but if I'd of known it was going to cost me as much and been as hard as it was I'd probably just bought a Z-28. On the other hand, I really like feeling like a rotary god! :P



Plus, thanks to everyone who has been kind enough to help me online, you know who you are.[/quote]

You're welcome, I know you couldn't have gotten it all done without my sage advice.



https://www.nopistons.com/forums/pub...1047683785.gif[/quote]

https://www.nopistons.com/forums/pub...1047683785.gif Your advice almost made me stick with a blown NA https://www.nopistons.com/forums/pub...>/rolleyes.gif

vosko 07-20-2002 02:30 PM
Originally Posted by OKIERX-7' date='Jul 20 2002, 03:26 PM
[quote name='Rotarydragon' date='Jul 20 2002, 02:21 PM'][quote name='OKIERX-7' date='Jul 20 2002, 10:06 PM'][quote name='vosko' date='Jul 20 2002, 01:56 PM']hooking the harness up is easy..... the rest of it gets tricky
Working out all the bugs on a car that wasn't designed for the engine, in a part of the country where there is NO rotary help for 200 miles, has been the trickiest part. God forgive me, but if I'd of known it was going to cost me as much and been as hard as it was I'd probably just bought a Z-28. On the other hand, I really like feeling like a rotary god! :P



Plus, thanks to everyone who has been kind enough to help me online, you know who you are.[/quote]

You're welcome, I know you couldn't have gotten it all done without my sage advice.



https://www.nopistons.com/forums/pub...1047683785.gif[/quote]

https://www.nopistons.com/forums/pub...1047683785.gif Your advice almost made me stick with a blown NA https://www.nopistons.com/forums/pub...>/rolleyes.gif[/quote]

ROFLMAO!!!!! https://www.nopistons.com/forums/pub...1047683785.gif

13BAce 07-20-2002 05:06 PM
Originally Posted by vosko' date='Jul 20 2002, 04:03 PM
i guess everyone has stuff to do today https://www.nopistons.com/forums/pub...DIR#>/wink.png
Yeah, I finally finished putting the turbo transmission and rear in the 91 coupe. Everything feels alot better, and now the car is ready for the future. https://www.nopistons.com/forums/pub...>/rolleyes.gif

vosko 07-20-2002 05:10 PM
Originally Posted by 13BAce' date='Jul 20 2002, 06:06 PM
[quote name='vosko' date='Jul 20 2002, 04:03 PM']i guess everyone has stuff to do today https://www.nopistons.com/forums/pub...DIR#>/wink.png
Yeah, I finally finished putting the turbo transmission and rear in the 91 coupe. Everything feels alot better, and now the car is ready for the future. https://www.nopistons.com/forums/pub...>/rolleyes.gif[/quote]

would you say "back to the future" https://www.nopistons.com/forums/pub...>/rolleyes.gif

13BAce 07-20-2002 05:18 PM
Originally Posted by vosko' date='Jul 20 2002, 08:10 PM
[quote name='13BAce' date='Jul 20 2002, 06:06 PM'][quote name='vosko' date='Jul 20 2002, 04:03 PM']i guess everyone has stuff to do today https://www.nopistons.com/forums/pub...DIR#>/wink.png
Yeah, I finally finished putting the turbo transmission and rear in the 91 coupe. Everything feels alot better, and now the car is ready for the future. https://www.nopistons.com/forums/pub...>/rolleyes.gif[/quote]

would you say "back to the future" https://www.nopistons.com/forums/pub...>/rolleyes.gif[/quote]

Who the hell knows? I just seem to run around in circles.

vosko 07-20-2002 05:21 PM
Originally Posted by 13BAce' date='Jul 20 2002, 06:18 PM
[quote name='vosko' date='Jul 20 2002, 08:10 PM'][quote name='13BAce' date='Jul 20 2002, 06:06 PM'][quote name='vosko' date='Jul 20 2002, 04:03 PM']i guess everyone has stuff to do today https://www.nopistons.com/forums/pub...DIR#>/wink.png
Yeah, I finally finished putting the turbo transmission and rear in the 91 coupe. Everything feels alot better, and now the car is ready for the future. https://www.nopistons.com/forums/pub...>/rolleyes.gif[/quote]

would you say "back to the future" https://www.nopistons.com/forums/pub...>/rolleyes.gif[/quote]

Who the hell knows? I just seem to run around in circles.[/quote]

i think it will be fine :bigok:

Rob x-7 07-20-2002 05:24 PM
Jim is a nut by the way. https://www.nopistons.com/forums/pub...1047683785.gif

vosko 07-20-2002 05:24 PM
Originally Posted by Rob x-7' date='Jul 20 2002, 06:24 PM
then what are we https://www.nopistons.com/forums/pub...#>/biggrin.png

Rob x-7 07-20-2002 05:25 PM
Originally Posted by vosko' date='Jul 20 2002, 06:24 PM
[quote name='Rob x-7' date='Jul 20 2002, 06:24 PM']Jim is a nut by the way. https://www.nopistons.com/forums/pub...1047683785.gif
then what are we https://www.nopistons.com/forums/pub...#>/biggrin.png[/quote]

Retards

vosko 07-20-2002 06:02 PM
Originally Posted by Rob x-7' date='Jul 20 2002, 06:25 PM
[quote name='vosko' date='Jul 20 2002, 06:24 PM'][quote name='Rob x-7' date='Jul 20 2002, 06:24 PM']Jim is a nut by the way. https://www.nopistons.com/forums/pub...1047683785.gif
then what are we https://www.nopistons.com/forums/pub...#>/biggrin.png[/quote]

Retards[/quote]

maybe your right https://www.nopistons.com/forums/pub...>/rolleyes.gif

horn4858 07-20-2002 06:29 PM
i was up all night trying to get some more runtime out of a 1997 computer for a neice of wife. feel like a bugeyed piece of ****.

13BAce 07-20-2002 06:29 PM
Originally Posted by Rob x-7' date='Jul 20 2002, 08:24 PM
I am not a nut. I am odd.http://www.plauder-smilies.com/tales/mcking.gif

Rotarydragon 07-20-2002 07:39 PM
HAHAHAHAHHAHAHAHHAHAHA



My NA may have a sticking apex seal.



Of course it's an excuse to rebuild it but I don't have the money par usual.

DaddyMac 07-20-2002 07:44 PM
today sucked :(

it was a ghost town out. wherever I went it was either closed or empty (like christmas). maybe there is something going on that I don't know about ? :o



my cars is making a nasty noise prolly do to the alternator pulley, but I thought it was my transmission or a bearing. damn, I'm stuck at home now :(


All times are GMT -5. The time now is 10:33 PM.


© 2024 MH Sub I, LLC dba Internet Brands