heres some funny ****..
08-19-2002, 02:59 PM
#1
Banned
Thread Starter
Join Date: Jan 2002
Posts: 2,068
I was at a junk yard this weekend getting parts..and looking for a turbo and I posted a thread on this local forum that im a prt of and this guy chews my *** telling people im giving faulse info look what he has to post...
.................
you might know what a bridge port is but you ahve no clue abotu rotorys. you can in no way put a stock junkyard turbo on your car unless your gonna use twin. and with a bridge port?! hahaha. do you have any idea how rotorys work?! they put out 2 times as much exhuast as any other engine! you will choke it with anything less then a t04! HP isn't everything. if you want to run 12s get a hybrid built by BNR super cars. they will take your stock turbo turbine side and put a t4 compressor side. but sence you dunno shiz about bridge ports or rotorys for that matter i doubt you have a clue what i'm talking about. Any way a bridge port will choke on that turbo as well. the a/r on the stock turbo is liek .90 (i'm not sure so don't flame me) how the hell are you gonna go smaller on a smaller turbo?! you need to find out how turbo work...oh yeah i hope you know your fuel system is already maxed out with exhuast and intake..... your gonna need 720 cc primarys and 1300cc or more secondarys plus a really big fuel pump. but hey i guess you knew that cuz of the bridge porting...oh and by the way hows your gas mileage? a HALF bridge port will get you 12 miles to the gallon with out gettig in to upper rmps....hope its not your daily driver you think hondas get pulled for exhuast? with a bp you will have the loudest car on the street! nothing comes close. but i guess your liek me and like driving the loudest chain saw in the world. a junk yard turbo WILL not work unless you go twin and that means all custom...and i guess you wanna go junkyard cuz its cheaper.....you might wanan think about how much a bp is gonna cost...i think you might need a stand alone (not sure no flames) so i say sell me your car, get a junk yard t3/t4 put it on a crx. they can support up to liek waht 450hp on a honda? they just wont work on rotorys you will choke the engine. oh yeah don't come on here yelling at ppl. i would have been more helpful to you but you have a bad att.
...................
Ok theres one now read the other........
...................
Heres where I was advertising for a local drag race @ a track for rotarys vs v8s etc...
.....................
well we know who wont be winning that comp (rotary7). i put my money on the V8s i'm a rotory head but its 1/8th mile not 1/4 mile. if it was 1/4 mile the Puro rotorys all the way. Don't listen to rotory 7 he has no clue what hes talking about. after replying to your turbo info post and reading this one i noticed you said ported and turbo soon....that means you have a N/A right? Do you know why most n/a stay n/a? because you can't boost that engine! its way to hard. plus if you try to drop in a turbo engine you can't because the drivetrain wont hold the power! not only tranny but the axels and all! you really dunno what your talking about! i usually don't make enemys online hell your my first but it really up sets me to see you put out soo much bad info and own a rare rotory. no head and pistons thats your advanage? wha? there advantage is that they have more displacement. the 1.3 lt rotory is kinda (kinda! not really) a 2.6lt 6 banger if you want to have it compairable to pistons. arg you make me sick, hurry up and blow the engine so a real rotory tuner with a better attitude an build it
..........
This guy is a crock of ****...
Any one running a turbo bigger than a T3<<<<lol .please post pics...so I can show him..and he thinks that you will have to run a TT set up..twin turbo*...This guy is tring to tell me about rotarys..and I dont think he can tell his *** from a hole in the wall
.................
you might know what a bridge port is but you ahve no clue abotu rotorys. you can in no way put a stock junkyard turbo on your car unless your gonna use twin. and with a bridge port?! hahaha. do you have any idea how rotorys work?! they put out 2 times as much exhuast as any other engine! you will choke it with anything less then a t04! HP isn't everything. if you want to run 12s get a hybrid built by BNR super cars. they will take your stock turbo turbine side and put a t4 compressor side. but sence you dunno shiz about bridge ports or rotorys for that matter i doubt you have a clue what i'm talking about. Any way a bridge port will choke on that turbo as well. the a/r on the stock turbo is liek .90 (i'm not sure so don't flame me) how the hell are you gonna go smaller on a smaller turbo?! you need to find out how turbo work...oh yeah i hope you know your fuel system is already maxed out with exhuast and intake..... your gonna need 720 cc primarys and 1300cc or more secondarys plus a really big fuel pump. but hey i guess you knew that cuz of the bridge porting...oh and by the way hows your gas mileage? a HALF bridge port will get you 12 miles to the gallon with out gettig in to upper rmps....hope its not your daily driver you think hondas get pulled for exhuast? with a bp you will have the loudest car on the street! nothing comes close. but i guess your liek me and like driving the loudest chain saw in the world. a junk yard turbo WILL not work unless you go twin and that means all custom...and i guess you wanna go junkyard cuz its cheaper.....you might wanan think about how much a bp is gonna cost...i think you might need a stand alone (not sure no flames) so i say sell me your car, get a junk yard t3/t4 put it on a crx. they can support up to liek waht 450hp on a honda? they just wont work on rotorys you will choke the engine. oh yeah don't come on here yelling at ppl. i would have been more helpful to you but you have a bad att.
...................
Ok theres one now read the other........
...................
Heres where I was advertising for a local drag race @ a track for rotarys vs v8s etc...
.....................
well we know who wont be winning that comp (rotary7). i put my money on the V8s i'm a rotory head but its 1/8th mile not 1/4 mile. if it was 1/4 mile the Puro rotorys all the way. Don't listen to rotory 7 he has no clue what hes talking about. after replying to your turbo info post and reading this one i noticed you said ported and turbo soon....that means you have a N/A right? Do you know why most n/a stay n/a? because you can't boost that engine! its way to hard. plus if you try to drop in a turbo engine you can't because the drivetrain wont hold the power! not only tranny but the axels and all! you really dunno what your talking about! i usually don't make enemys online hell your my first but it really up sets me to see you put out soo much bad info and own a rare rotory. no head and pistons thats your advanage? wha? there advantage is that they have more displacement. the 1.3 lt rotory is kinda (kinda! not really) a 2.6lt 6 banger if you want to have it compairable to pistons. arg you make me sick, hurry up and blow the engine so a real rotory tuner with a better attitude an build it
..........
This guy is a crock of ****...
Any one running a turbo bigger than a T3<<<<lol .please post pics...so I can show him..and he thinks that you will have to run a TT set up..twin turbo*...This guy is tring to tell me about rotarys..and I dont think he can tell his *** from a hole in the wall
08-19-2002, 04:50 PM
#4
Banned
Thread Starter
Join Date: Jan 2002
Posts: 2,068
Its a local forum I go to to check on events and other things and just to post..Im the only one with a RX7 there..when I first came they had said so much faulse **** about them how the suck and not reliable etc..I had to set **** straight..No one says **** about it ...BUT since I posted about Turbos to get opinions on..them dumb ***** come out the wood work..
the site is
www.tamparacing.com
and I go by the name Rotary7 there...Look for the post in general discussion...I tried to get a part in the forum for Mazdas they said yeah then blew me off..that was like 4 months ago..
Some peopel talk **** about street racing there..like one guy commented on me how all you ricers need to be jailed etc,,,I just read one of his post like 2 days ago talking about how he raced a car on the streeet and blah blah...People are so ****** dumb there...
the site is
www.tamparacing.com
and I go by the name Rotary7 there...Look for the post in general discussion...I tried to get a part in the forum for Mazdas they said yeah then blew me off..that was like 4 months ago..
Some peopel talk **** about street racing there..like one guy commented on me how all you ricers need to be jailed etc,,,I just read one of his post like 2 days ago talking about how he raced a car on the streeet and blah blah...People are so ****** dumb there...
08-20-2002, 10:44 AM
#6
Senior Member
Join Date: Jan 2002
Posts: 181
id like to meet this ******* so i can **** in his face laughing, then again i got enough of that here in miami with the abundance of morons( aka ricers) that live here. dammit i really need to finish my fukin car anyone got about 500 bucks they can lend me!!!!!!!! 
08-20-2002, 11:47 AM
#7
Banned
Thread Starter
Join Date: Jan 2002
Posts: 2,068
Originally Posted by evilT2' date='Aug 20 2002, 11:32 AM
maybe you should punch a hole in his head with something and then **** the hole. i bet hed like that one.
or you could go with the generic gouge out his eyes with a hot poker and skull **** him
or you could go with the generic gouge out his eyes with a hot poker and skull **** him
I wish you guys could see the whole thread..now I have every one and thier mom posting **** towards me..
I guess when your right peopel dont liek it..
08-20-2002, 11:53 AM
#8
Banned
Thread Starter
Join Date: Jan 2002
Posts: 2,068
Originally Posted by 13b1stgen' date='Aug 20 2002, 11:44 AM
id like to meet this ******* so i can **** in his face laughing, then again i got enough of that here in miami with the abundance of morons( aka ricers) that live here. dammit i really need to finish my fukin car anyone got about 500 bucks they can lend me!!!!!!!!
I cant wait for these **** faces to see a Mustang eating 1st gen..
Im hoping to have the fastest first gen here..next year this time ...
So now im accepting funds for Save the 7 (SoRRoW first gen)<<lol
This what makes me love my Rotary more and more...
ALSO this one guy is mad cause he was tsalking how hes gonan have a 13 sec car..and I asked him how much did it cost him he said 9k..I laughed and said 9k for a 13 sec car!...lol
Im glad I own a rotary...next thing I know **** broke loose and the ****** ricers come otu the wood work...
08-20-2002, 11:55 AM
#9
Banned
Thread Starter
Join Date: Jan 2002
Posts: 2,068
