I just got AIMed by a friend whos renting out a Dyno machine for a day ...

He says $25. for 2 runs.....they dont make adjustments..unless you pay more..



I think this is good..so I can get an idea of what im running ..before I go ported/boosted....or a swap..



Well heres the info ...



..................................





Type R Performance Dyno Day at Speed Street Tuning



1/4 mile North of the nebraska-florida split, beside "Pope's Well drilling"

(On west side of 41)



$25. bucks/2 runs



oct 26th



In ground Dynojet, registers up to 1200 HP.



call 813 909 1984 for more info/to give me a count of whos coming



-nick



..............................





Im gona make flyer and pass them out..if you show up without me there...

Just say

Rotary7 on TR told me to come ..

or tell him Tony with the black first gen RX7...





Im probally gonna be there to get my proof of the 90 HP 300/lb torque im running...

i could go but what would be the point of dynoing a stock vert.

you would just be very dissapointed. a stock S4 vert at that

Well for the cash ...for me ..its just to let me know where im at ..

before I do major mods...



$25. is not bad..most places charge 60-75$.

Any FL guys going?Central FL?

Sounds like a good deal, If you're NA comes out 110-120 HP DONT DO ANY MODS, Save yo $$$ for a new QUALITY engine and mod that!

I will give direction the best I can from 275 and I-75

But if theres any questions either AIM me or call that number

(Which is not me) and ask for Nick...Hes throwing the event..





................

(Coming into Tampa from 275 North & South)



Come towards Tampa either 275 North or South .....Get off at Beares Ave Go East to Highway 41 (AKA Nebraska Ave) approx-1/4 mile Once at 41 go North (Left) down little over 1/4 mile...You will pass a fork in the road....get in the left lanes.. Look for auto repairs shop and used cars shops on the left....You will see Pope's Well drilling'on the left....



The entrance to the shop is between chain link fence....just before (next door) to the Popes well drilling Once there you will see banners for the DynoJet....or look for Street Speed tuning...ask for Nick tell him Rotary7 on TR or tell him Tony with the first gen RX7 black and silver sent you...He will set you up with your $25. runs If you want them to make adjustments its a little more..or I think you get a couple mins to make your own adjustments...



...............









[color="orange"]Coming from I-75 North and South.....Get off at the Fletcher exit go West (right)go about 5 miles down untill you hit 41 (AKA Nebraska Ave) go North (Right) then about 1/2 mile you will pass a fork in the road get in the left lanes...on your left you will look for a shop called Popes Well Drilling the shop is right next door to that ..you have to drive through the chain link fence...and look for Street Speed.. you wil see banners for the Dyno Jet ask for Nick ...tell him Rotary7 on TR or Tony with the black and silver first gen RX7 sent you ....You have to tell him this so he can set you up for yoru $25. runs..This is for today only!!!





...............

Please pass this to al Central and South FL guys .....THIS IS A ONE TIME DEAL...FOR SAT OCT 26

PLEASE PASS THIS TO ALL AUTO FORUMS.....FOR CENTRAL AND SOUTH FL

Your getting me scared to see what im pushing out of my n/a 12a https://www.nopistons.com/forums/pub...O_DIR#>/11.gif



I think it will be beter than that

too dar for me...why would i wanna dyno my slow german pos anyways...i need an rx-7.

What you waiting for ....SELL IT!