The V Mount comes with the following parts:
935 CFM high flow intercooler with aluminum piping 2" racing radiator Samco silicon radiator hoses Silicon turbo hoses T bolt clamps for the intercooler shrouds all the mounting hardware Regular price: $2800 + shipping Group buy price: $2300 including shipping in the US The offer ends on 5-31-03. For more info, go to http://www.rotaryextreme.com/vmount.html Thank you. Chuck Huang http://www.rotaryextreme.com/vm/vm-1.jpg http://www.rotaryextreme.com/vm/vm-5.jpg http://www.rotaryextreme.com/vm/vm-4.jpg http://www.rotaryextreme.com/vm/vm-2.jpg http://www.rotaryextreme.com/vm/vm-3.jpg |
chuck, i think i remember you saying something about you can make the kit with a koyo or fluidyne rad. are you still willing to do this? if so how much extra would it be?
is the IC-turbo pipe the same whether or not you are single/stock twins? hopefully i can get in on this one. |
|
Holy, chuck is the king of group buys! Hey chuck, maybe you should consider not offering back-to-back group buys... You'll probably get more people in each if ya give them a month to recover from the precious one!
|
word... i can't keep up with all these group buys... dayam!
|
isnt the radiator koyo with modified end tanks?
|
|
Originally Posted by JimmyJimboJet' date='Apr 22 2003, 04:10 AM
chuck, i think i remember you saying something about you can make the kit with a koyo or fluidyne rad. are you still willing to do this? if so how much extra would it be?
is the IC-turbo pipe the same whether or not you are single/stock twins? hopefully i can get in on this one. Chuck Huang |
Originally Posted by vudoodoodoo' date='Apr 22 2003, 04:21 AM
Chuck Huang |
Originally Posted by Sinful7' date='Apr 22 2003, 05:54 AM
Holy, chuck is the king of group buys! Hey chuck, maybe you should consider not offering back-to-back group buys... You'll probably get more people in each if ya give them a month to recover from the precious one!
But just remember this. Once you have purchased from Rotary Extreme, your second and following purchases will never be at retail price ever again! I should use that as my company slogan. https://www.nopistons.com/forums/pub...IR#>/smile.png Chuck |
Originally Posted by cmartinp28' date='Apr 22 2003, 06:56 AM
isnt the radiator koyo with modified end tanks?
Chuck Huang |
so with a V-mounted i/c and rad. there is no need for an air duct feeding to the i/c? https://www.nopistons.com/forums/pub...IR#>/wacko.png
|
Looks good, but there's no purpose for the v-mount if you don't have a vented hood, right? https://www.nopistons.com/forums/pub...1047683561.gif
|
Originally Posted by Benny' date='Apr 26 2003, 07:18 AM
so with a V-mounted i/c and rad. there is no need for an air duct feeding to the i/c? https://www.nopistons.com/forums/pub...IR#>/wacko.png
I personally do not feel a duct is necessary because the radiator and the intercooler form the V Shape duct but since the customers are asking for it, I include it if you are going with the setup that eliminates the A/C. I have different V mounts setups for different situtation. You will have to let me know what's on your car so I can give you the correct shrouds and duct, etc. Chuck Huang |
Originally Posted by rx7machine' date='Apr 26 2003, 09:17 AM
Looks good, but there's no purpose for the v-mount if you don't have a vented hood, right? https://www.nopistons.com/forums/pub...1047683561.gif
If you have a vented hood, it's going to work even better during a hot day. But it works better than any stock mount IC on the market the way it is. I already have some lengthy dicussion either here or on the other forum. You can do a search and read about it. Thank you. Chcuk Huang |
Chuck, where do you mount the AST?
One more question off topic, how are the PFC's coming? https://www.nopistons.com/forums/pub...IR#>/smile.png Oh, and how much is the HKS hyper damper group buy for? |
Originally Posted by Scrub' date='Apr 29 2003, 08:37 PM
Chuck, where do you mount the AST?
One more question off topic, how are the PFC's coming? https://www.nopistons.com/forums/pub...IR#>/smile.png Oh, and how much is the HKS hyper damper group buy for? I will have the Hiper Damper group buy page up over the weekend as well. Thank you Chuck Huang |
crap.
|
Originally Posted by rotaryextreme' date='Apr 30 2003, 08:48 PM
[quote name='Scrub' date='Apr 29 2003, 08:37 PM'] Chuck, where do you mount the AST?
One more question off topic, how are the PFC's coming? https://www.nopistons.com/forums/pub...IR#>/smile.png Oh, and how much is the HKS hyper damper group buy for? I will have the Hiper Damper group buy page up over the weekend as well. Thank you Chuck Huang [/quote] Chuck, I would not dismiss the AST out of hand. Why? I can explain but it would take more than a few pages of technical description. For the sake of conciseness, lets ask a few questions: 1. Car companies are notoriously cheap; if they can avoid putting a part on a car, they will. Then why does Mazda built a special tank in addition to the overflow tank? 2. Mercedes, BMWs, Audis, Volvo and even some American cars use an AST. Their AST don't look like ours b/c their ASTs are real AST containing about 1.5 to 2 quarts of coolant. 3. O-rings are used for seals where clearance are large (like in rocket boosters). O-rings don't seal well below their operating temperature. Our engines use o-rings to seal the coolant passages. At room temperature, they tend to allow air in (Check with KD rotary on this). Why not use an AST to eliminate air in the system? Eliminate the AST if you think they're not worth the trouble but at least look at the evidence objectively before dismissing it out of hand. In my case, I eliminated the factory AST so that I can use a Volvo AST from an S-70. No more coolant buzzer and not knowing my coolant level. I'll post pictures if enough people bug me about it. |
Originally Posted by PoMan Ferrari' date='May 1 2003, 06:46 AM
[quote name='rotaryextreme' date='Apr 30 2003, 08:48 PM'] [quote name='Scrub' date='Apr 29 2003, 08:37 PM'] Chuck, where do you mount the AST?
One more question off topic, how are the PFC's coming? https://www.nopistons.com/forums/pub...IR#>/smile.png Oh, and how much is the HKS hyper damper group buy for? I will have the Hiper Damper group buy page up over the weekend as well. Thank you Chuck Huang [/quote] Chuck, I would not dismiss the AST out of hand. Why? I can explain but it would take more than a few pages of technical description. For the sake of conciseness, lets ask a few questions: 1. Car companies are notoriously cheap; if they can avoid putting a part on a car, they will. Then why does Mazda built a special tank in addition to the overflow tank? 2. Mercedes, BMWs, Audis, Volvo and even some American cars use an AST. Their AST don't look like ours b/c their ASTs are real AST containing about 1.5 to 2 quarts of coolant. 3. O-rings are used for seals where clearance are large (like in rocket boosters). O-rings don't seal well below their operating temperature. Our engines use o-rings to seal the coolant passages. At room temperature, they tend to allow air in (Check with KD rotary on this). Why not use an AST to eliminate air in the system? Eliminate the AST if you think they're not worth the trouble but at least look at the evidence objectively before dismissing it out of hand. In my case, I eliminated the factory AST so that I can use a Volvo AST from an S-70. No more coolant buzzer and not knowing my coolant level. I'll post pictures if enough people bug me about it. [/quote] I don't want to turn this thread into an AST debate but let me just briefly share my experience and thought on it. 1. I have eliminated AST on my car for over 4 years never had a problem. 2. How does AST eliminate air? There is a pressure cap on there which opens up at 0.9 kg/cm2. It normally will not open, otherwise, all your coolant will be going to your over flow tank and that usually means your car is overheating. So that cap will not open until your car is overheating. If there was really air inside the cooling system, it will stay there until the cap opens. 3. When AST is eliminated, a 2nd gen water filler neck replaces the stock one and you bolt the AST 0.9kg/cm2 cap on there. There is a hose which goes from the neck to the over flow tank. So your water pump housing serves as an AST now. 4. So why did Mazda put an extra AST there, I have no idea. I just know the stock one splits easily so the Mazda engineering department isn't that thoughtful in my opinion. 5. If your water seal do not seal well, that means the exhaust gas is going into the coolant passages heating up the coolant and that means overheating and a new motor. An AST is not going to save your motor from a leaking water seal. It does not take too long for 1200F exhaust gas to heat up the coolant and make it boil. 6. I personally think the stock AST is just redundant, especially when it is so small in size. And that's probably why I never saw any advantage of disavantage of using a stock AST or an aftermarket or not because their beneficial factor is too small to measure. If you have some technical bulletein that you can share with me and educate me on this subject, please direct me to a link or book. If I said any thing wrong above, please correct me as well. Thank you Chuck Huang |
Originally Posted by rotaryextreme' date='May 3 2003, 07:44 PM
[quote name='PoMan Ferrari' date='May 1 2003, 06:46 AM'] [quote name='rotaryextreme' date='Apr 30 2003, 08:48 PM'] [quote name='Scrub' date='Apr 29 2003, 08:37 PM'] Chuck, where do you mount the AST?
One more question off topic, how are the PFC's coming? https://www.nopistons.com/forums/pub...IR#>/smile.png Oh, and how much is the HKS hyper damper group buy for? I will have the Hiper Damper group buy page up over the weekend as well. Thank you Chuck Huang [/quote] Chuck, I would not dismiss the AST out of hand. Why? I can explain but it would take more than a few pages of technical description. For the sake of conciseness, lets ask a few questions: 1. Car companies are notoriously cheap; if they can avoid putting a part on a car, they will. Then why does Mazda built a special tank in addition to the overflow tank? 2. Mercedes, BMWs, Audis, Volvo and even some American cars use an AST. Their AST don't look like ours b/c their ASTs are real AST containing about 1.5 to 2 quarts of coolant. 3. O-rings are used for seals where clearance are large (like in rocket boosters). O-rings don't seal well below their operating temperature. Our engines use o-rings to seal the coolant passages. At room temperature, they tend to allow air in (Check with KD rotary on this). Why not use an AST to eliminate air in the system? Eliminate the AST if you think they're not worth the trouble but at least look at the evidence objectively before dismissing it out of hand. In my case, I eliminated the factory AST so that I can use a Volvo AST from an S-70. No more coolant buzzer and not knowing my coolant level. I'll post pictures if enough people bug me about it. [/quote] I don't want to turn this thread into an AST debate but let me just briefly share my experience and thought on it. 1. I have eliminated AST on my car for over 4 years never had a problem. 2. How does AST eliminate air? There is a pressure cap on there which opens up at 0.9 kg/cm2. It normally will not open, otherwise, all your coolant will be going to your over flow tank and that usually means your car is overheating. So that cap will not open until your car is overheating. If there was really air inside the cooling system, it will stay there until the cap opens. 3. When AST is eliminated, a 2nd gen water filler neck replaces the stock one and you bolt the AST 0.9kg/cm2 cap on there. There is a hose which goes from the neck to the over flow tank. So your water pump housing serves as an AST now. 4. So why did Mazda put an extra AST there, I have no idea. I just know the stock one splits easily so the Mazda engineering department isn't that thoughtful in my opinion. 5. If your water seal do not seal well, that means the exhaust gas is going into the coolant passages heating up the coolant and that means overheating and a new motor. An AST is not going to save your motor from a leaking water seal. It does not take too long for 1200F exhaust gas to heat up the coolant and make it boil. 6. I personally think the stock AST is just redundant, especially when it is so small in size. And that's probably why I never saw any advantage of disavantage of using a stock AST or an aftermarket or not because their beneficial factor is too small to measure. If you have some technical bulletein that you can share with me and educate me on this subject, please direct me to a link or book. If I said any thing wrong above, please correct me as well. Thank you Chuck Huang [/quote] Here's my set up: http://www.rx7club.com/forum/showthread.ph...threadid=186995 |
vmounts are awesome....
|
chuck....i have a concern on rad drain plug location..
not in the ideal location..above low point ..looks reversed from the pics |
Originally Posted by amp' date='Jun 2 2003, 07:18 PM
chuck....i have a concern on rad drain plug location..
not in the ideal location..above low point ..looks reversed from the pics Chuck |
All times are GMT -5. The time now is 09:42 PM. |
© 2024 MH Sub I, LLC dba Internet Brands