I'm swaping a JDM 13BT into my 83 RX-7. Can anybody tell me what i need to do to the driveline in a turbo II swap, do i just get a TII driveline a mod it?? Can I buy a transmission "swap" crossmember?? So i can fit a TII tranny in a 12A frame? I have a GSL-SE oil pan and a GSL-SE front cover. plus the racingbeat front mounting bracket.....What else do I need???

i u gonna need drive shat , engine management . custom make the trany crossmember t2 throtle cable and some more stuff

Does the TII drive shaft bolt right up or do you have to modify it to fit the 83 rear end??

must get a new drive shaft tranny is longer get a good drive shaft place and get the front t2 yoke and the rear fb the measure it and have them make it 4 u

Find a GSL-SE front-crossmember, and your stock tranny crossmember should work with the TII tranny. (with $10 worth of home-depot parts)



You have to drill two new holes in the tranny crossmember (about 1/2 in back from stock). Then buy a piece of 3/4 in box-steel, drill two holes through it to make the mount, and find two new bolts to fit (same thread as stock, just about an inch or so longer)



I have my tranny out, I suppose I could take a pic. https://www.nopistons.com/forums/pub...#>/biggrin.png

Here's some notes and pictures that might help... '91 TII engine to '81 GSL notes https://www.nopistons.com/forums/pub...#>/biggrin.png

yep, thats good stuff

Hell Yeah!! https://www.nopistons.com/forums/pub...#>/biggrin.png thanks for the hook up guys.. j9fd3s's swap site is awsome!!

thats jes's swap, my car isnt nearly that nice, or that turbo'ed