I am getting all the little loose end tied up with my Cosmo RE swap into my TII and one thing I am having a little troubl with is the oil cooler lines. I don' mind making my own but I don't even know where to begin on purchasing the fittings, lines, etc.... The pressure line goes to the oil filter adaptor, and the return line comes in at the front cover, like the FD's. I would also like to run dual TII oil coolers on this, and I need a line to go from the top of the front iron to my single turbo. I guees basically what I am asking for is a list of part numbers and/or size/descriptions of the stuff I need to buy to make this happen. I would appreciate any help. Thanks!!!! https://www.nopistons.com/forums/pub...#>/biggrin.png

Best bet is to take the fittings and stuff that the lines are going to attach to, and a simple system diagram w/measurements to your local hydraulics shop. They'll help you out from there.