need help Haltech E8
I'm installing the E8 on a 13bt all stock. I used there program and it runs like crap. There are some settings I'm not sure of.
1.what type of trigger should I set it for? set at multitooth rotary. 2.spark mode ? set at direct fire. Does that need to be changed to wast spark? 3. What does the injector current need to be set to? thanks for any help Dave |
Re: need help Haltech E8
I'll answer my own questions as I figure it out. I hope it wil help someone else in the future.
when using the stock ignitors the spark type should be waste spark. Dave |
Re: need help Haltech E8
1) Multitooth rotary.
2) If you are using the original coils then set it to distributor. Make sure your wiring is as follow: Ign 1 to leading coil pack, Ign 2 to trailing coils, Ign 3 to trailing coil toggle wire. Leading coil = pink wire, trailing coils = pink wire, toggle = white wire 3) 2 Amp/ 0.5 Amp. Hope that helps. |
Re: need help Haltech E8
thanks for the help.
Dave |
All times are GMT -5. The time now is 06:53 PM. |
© 2024 MH Sub I, LLC dba Internet Brands