I'm about to start an installation of a Haltech F10 on my NA 90 13b. The secondary actuators are removed. Does anyone have a map that works? I'd like to start with something better than the generic one Haltech provides.
|
the generic one is pretty good..... it will make the car start and run. your best bet is to get an AFR gauge it makes tuning SO MUCH EASIER!
|
Got the AFR gauge, not wide band though.
|
if your running N/A its alot easier to tune. personally i would go on a dyno on a wideband for an hour and you should have it tuned 90% with just some fine tuning on the street. where are you located ?
|
I'm in CO.
|
i would get the car up and running and tune it by ear a little. one key thing to keep in mind. VERY lean or VERY rich will cause a hesitation when tuning.....
|
can you use an e6k map?
mike |
Hmm you might be able to import the fuel map part only. you have an option to import in the software.
C |
thats what i'm thinking
mike |
All times are GMT -5. The time now is 07:37 PM. |
© 2024 MH Sub I, LLC dba Internet Brands