hey im looking at using the aem ems for my 13bre swap into 2nd gen if youve done this i was hoping to get info on wiring up the plug and play for the 3rd gens into this setup otherwise ill spend the extra money and get the universal aem ems

thanks

[quote name='prozeke07' date='Apr 30 2005, 05:56 AM']hey im looking at using the aem ems for my 13bre swap into 2nd gen if youve done this i was hoping to get info on wiring up the plug and play for the 3rd gens into this setup otherwise ill spend the extra money and get the universal aem ems

thanks


[/quote]

save your money and not buy a aem ems, leave that computer for hondas . go with a wolf 3d 4.0

From what I understand you cannot adjust the timing split. Which depending on your setup this may be catastrophic.



Either the Wolf or a Haltech. If you got the money to spend I have seen Microtechs put up some serious numbers.

get whatever you can get tuned easiest all three are good systems

The aem is plug and play. YOu wold need to swap sensors from a T2 to you cosmo..and re-wire some of the harness..find an ems that comes with its own new sensors and wireing harness...like the Haltech, wolf, and the microtech. besides you don't need that many sensors to run the RE with a standalone...the Haltech comes with what you will need to make it work.