i have a S5 TII with a Med street port ( template (for a FD) from pineapple racing.)
T70 turbo FD manifold front mount, of course 550cc primary, 1000cc secondary FC1000 ignition with stock coils Apex-i power FC ecu all the other crap dosnt really do much anyway, so i'll leave it unlisted... i had a date set to get tuned by Pettit Racing, but when i called them again. they told me they might be selling there dyno! so i never called them back. who else tunes apex-i in this area. not some up and coming tuner either. an experienced tuner with apexi. im guessing 450WHP at 16psi. but i tend to be an optimistic https://www.nopistons.com/forums/pub...IR#>/smile.gif |
call scott at mazsport or check with speedsource
|
where are these places? number? web sites???
|
mazsport is in largo florida in the clearwater area and speedsource is in florida some place cant remember the town off hand but check there web page out, www.speedsourceinc.com there the rolex 24 hour race winners this year with the rx8
|
thanks man...i think im gonna go with mazsport. there only 1 hour 41 minutes. speedsource is 3 hours away!!! not a good drive with an unted car. or barely tuned car anyway...
|
Whoa, I dont think you will get even close to 450rwhp with those injectors.
My guess is mid 300s. |
Originally Posted by RONIN FC' post='895196' date='Feb 24 2008, 06:42 AM
Whoa, I dont think you will get even close to 450rwhp with those injectors.
My guess is mid 300s. yeah...1000's are pretty weak for this set up. i been trying to find a set of 1600's that fit the stock rail... know of any? but i have seen my identical set-up push mid 400's without going over 14-16lbs. and 1000's will handle that. but 1600's are more desireable. |
8.4cc per 1 HP @85% duty cycle
Im sure there out there, Rx7.com rings a bell. When in doubt, add more. Im not sure i like the idea of the 1600s myself. Thats alot of fuel in one spot. |
keep an eye out for when gaby skern comes to town. check the florida/SE section over at club. heres his last trip. i wished i had seen your thread earlier.
http://www.rx7club.com/showthread.php?t=720295 |
Marren's Pro Import injectors are direct replacements.
http://injector.com/specs/051600PI.pdf http://injector.com/fuelinjectors.php?PHPS...2fa31db39c10a97 |
|
my boy had his car tuned by gabby when he wasnt so famous.
he actually laughed at the previous map. and without running the car. he gained 40WHP!!!! damn, hes the man! PM me when you know hes coming back in town... thanks! |
the red dragon was awsome keith
|
i had my car tuned by cft .. it pulled off 230whp missing at 15 psi at 6500 rpm then it broke... a few months later i got it rebuilt the same way and gabby tuned it with out getting on the dyno . then on the dyno it pull off 275whp @12 psi 7500rpm using ngk b9es spark plugs using race plugs it pull 280whp@12 psi 7500rpm .all the car had was street port, atkin seals and a hybrid turbo( like bnr) and an npr izusu intercooler but the turbo was broken (making all sorts of noise)
|
the red dragon was a beast...
|
|
just noticed this...(dont frequent the florida section much). if you cant make it the best bet would be to call robert and ask him if he can give you a courtesy call next time hes around.
http://www.rx7club.com/showthread.php?t=735500 |
All times are GMT -5. The time now is 11:42 PM. |
© 2024 MH Sub I, LLC dba Internet Brands