check out my results at the dyno.
601.8 and 480 @26psi Had some injector issues so we wil be dynoing again. mario |
hoy ****... what kinda 1/4 you run... that is crazy modified.
|
he want to embarass 1000hp supra's https://www.nopistons.com/forums/pub...#>/biggrin.png
|
GEEZ!...Those are some GREAT numbers! https://www.nopistons.com/forums/pub...#>/BURNOUT.gif
|
DAMN that is focking bad ass dude. AWSOME numbers. Remember bring the camera for the next DYNO!!!!
-Rikki |
Mario where can I see your mod list? What porting did you do? A street port?
|
it is a street port. I am heading out home right now.......I'll post a mod list when I get home https://www.nopistons.com/forums/pub...IR#>/smile.png
|
:o WOW! i wanna know!
|
talk about sweet ass. wish i had that car
|
Lets keep in mind that I do have a street port but Marcos Acosta has a vast experience with these motors and knows many tricks to make them fast and reliable. While many shops rely on technology, this man relies on experience, intuition and r&d. This is why I chose his shop.
List of mods: Greddy T88 Turbo, Greddy Elbow, Greddy FMIC, Ported & Polished upper and lower manifold, Street Ported Motor(a la MVA), dp, Greddy Catback, Supra intank pump, Bosch external race pump, 850 primaries, 1600 secondaries, pinned, 3mm hurley seals, Microtech Mtx8 ecu and a few extra little things. NO NOS!!! Mario |
Originally Posted by t88kid' date='Sep 20 2002, 06:12 PM
Lets keep in mind that I do have a street port but Marcos Acosta has a vast experience with these motors and knows many tricks to make them fast and reliable. While many shops rely on technology, this man relies on experience, intuition and r&d. This is why I chose his shop.
List of mods: Greddy T88 Turbo, Greddy Elbow, Greddy FMIC, Ported & Polished upper and lower manifold, Street Ported Motor(a la MVA), dp, Greddy Catback, Supra intank pump, Bosch external race pump, 850 primaries, 1600 secondaries, pinned, 3mm hurley seals, Microtech Mtx8 ecu and a few extra little things. NO NOS!!! Mario mike |
Opps forgot the 4msd coils and ignitions and fuel lines/rail and HKS wastegate and bov that came with the turbo kit.
There are a few more just really too much too list. Like interior enhancements, stereo, etc, etc. |
Jesus. You 'da man!
|
Thats impressive, i though u needed alot more to get that much power. Once again very nice.
|
a Greddy T88 turbo! I was thinking about putting that into my 3rd gen but wasn't sure if i should. Why the T88 man? besides more boost of course. I haven't seen too many rx7's with that turbo and always wondered why not. Is your Rx7 daily driven or is it for racing purposes only? I know marcos acosta has a rotary engine in his mx3, does he also have that T88 setup? and does he have a website? What's your 1/4 mile going to be man. I'm just very interested.
|
Originally Posted by blaze08' date='Sep 22 2002, 09:18 PM
a Greddy T88 turbo! I was thinking about putting that into my 3rd gen but wasn't sure if i should. Why the T88 man? besides more boost of course. I haven't seen too many rx7's with that turbo and always wondered why not. Is your Rx7 daily driven or is it for racing purposes only? I know marcos acosta has a rotary engine in his mx3, does he also have that T88 setup? and does he have a website? What's your 1/4 mile going to be man. I'm just very interested.
2. Is the rex daily driven?- Yes and no. I normally take the subway to work. But if I need to travel out of the city I'll drive my car. It is not at all a race car. No cage. 3. I know marcos acosta has a rotary engine in his mx3, does he also have that T88 setup? and does he have a website? He has a twin turbo setup. He no longer has the MX3.....it was stolen with the trailer one night after a dyno session before an event. They are working on a website. 4. What's your 1/4 mile going to be man? I'm hoping high 10's on slicks but I don't know whether the stock driveline will hold with slicks. Mario |
Drives shafts will hold for a while and the diff too. Just make sure you run slicks and dont use poppy street tires. Never dump the clutch on street tires dude.
start at 13psi or so on slicks and work your way down. IMO just my .02 cents -Rikki |
rikki change your sig https://www.nopistons.com/forums/pub...DIR#>/wink.png
|
Originally Posted by vosko' date='Sep 23 2002, 12:02 PM
rikki change your sig https://www.nopistons.com/forums/pub...DIR#>/wink.png
-Rikki |
taht is ******* INSANE!!!!!
|
Originally Posted by Dont_Be_A_Rikki' date='Sep 23 2002, 02:56 PM
Drives shafts will hold for a while and the diff too. Just make sure you run slicks and dont use poppy street tires. Never dump the clutch on street tires dude.
start at 13psi or so on slicks and work your way down. IMO just my .02 cents -Rikki |
Originally Posted by 1Revvin7' date='Sep 24 2002, 12:08 PM
[quote name='Dont_Be_A_Rikki' date='Sep 23 2002, 02:56 PM']Drives shafts will hold for a while and the diff too. Just make sure you run slicks and dont use poppy street tires. Never dump the clutch on street tires dude.
start at 13psi or so on slicks and work your way down. IMO just my .02 cents -Rikki Yes, but he's got a VERY BEEFY driveline....clutch/TRANSMISSION/diff etc... |
Originally Posted by Dont_Be_A_Rikki' date='Sep 23 2002, 07:39 PM
[quote name='vosko' date='Sep 23 2002, 12:02 PM']rikki change your sig https://www.nopistons.com/forums/pub...DIR#>/wink.png
-Rikki[/quote] don't undercut yourself. :bigok: |
Driveline/suspension play a very very omportant roll in getting the car to run 9 secs. I think the most I'll see out of the car will be a high 10 sec run on this setup without touching the suspension. I havent driven a 10 sec car in a while too....or dragged at the track for that matter. Been 5 years now.
I'll have to get used to drag racing again I guess. |
WOW! Nice numbers. Go man GO. Tom
|
Originally Posted by vosko' date='Sep 19 2002, 11:34 AM
he want to embarass 1000hp supra's https://www.nopistons.com/forums/pub...#>/biggrin.png
be realistic vosko and get a supra yourself. |
Originally Posted by s13srmadness' date='Oct 2 2002, 04:21 AM
[quote name='vosko' date='Sep 19 2002, 11:34 AM']he want to embarass 1000hp supra's https://www.nopistons.com/forums/pub...#>/biggrin.png
be realistic vosko and get a supra yourself.[/quote] ha thanks steve https://www.nopistons.com/forums/pub...R#>/violin.gif |
Originally Posted by jspecracer7' date='Sep 23 2002, 03:14 PM
[quote name='1Revvin7' date='Sep 24 2002, 12:08 PM'][quote name='Dont_Be_A_Rikki' date='Sep 23 2002, 02:56 PM']Drives shafts will hold for a while and the diff too. Just make sure you run slicks and dont use poppy street tires. Never dump the clutch on street tires dude.
start at 13psi or so on slicks and work your way down. IMO just my .02 cents -Rikki Yes, but he's got a VERY BEEFY driveline....clutch/TRANSMISSION/diff etc...[/quote] o yeah, i forgot.. https://www.nopistons.com/forums/pub...1047683894.gif hks dogmission |
600+HP.... WOW. great numbers. i hope to get there in about year or so. do you have any pics of your car, engine????
|
Hey Mario come down to Nanuet on Sunday night. There's a 10 seocond vette that needs to be showed what a rotary can do.
|
Originally Posted by 1Revvin7' date='Oct 3 2002, 05:40 AM
[quote name='jspecracer7' date='Sep 23 2002, 03:14 PM'][quote name='1Revvin7' date='Sep 24 2002, 12:08 PM'][quote name='Dont_Be_A_Rikki' date='Sep 23 2002, 02:56 PM']Drives shafts will hold for a while and the diff too. Just make sure you run slicks and dont use poppy street tires. Never dump the clutch on street tires dude.
start at 13psi or so on slicks and work your way down. IMO just my .02 cents -Rikki Yes, but he's got a VERY BEEFY driveline....clutch/TRANSMISSION/diff etc...[/quote] o yeah, i forgot.. https://www.nopistons.com/forums/pub...1047683894.gif hks dogmission[/quote] LOL...yeah....That's what I want. https://www.nopistons.com/forums/pub...IR#>/boink.gif |
Originally Posted by jspecracer7' date='Oct 4 2002, 07:04 PM
[quote name='1Revvin7' date='Oct 3 2002, 05:40 AM'][quote name='jspecracer7' date='Sep 23 2002, 03:14 PM'][quote name='1Revvin7' date='Sep 24 2002, 12:08 PM'][quote name='Dont_Be_A_Rikki' date='Sep 23 2002, 02:56 PM']Drives shafts will hold for a while and the diff too. Just make sure you run slicks and dont use poppy street tires. Never dump the clutch on street tires dude.
start at 13psi or so on slicks and work your way down. IMO just my .02 cents -Rikki Yes, but he's got a VERY BEEFY driveline....clutch/TRANSMISSION/diff etc...[/quote] o yeah, i forgot.. https://www.nopistons.com/forums/pub...1047683894.gif hks dogmission[/quote] LOL...yeah....That's what I want. https://www.nopistons.com/forums/pub...IR#>/boink.gif[/quote] i want a greddy six speed for my FD...... https://www.nopistons.com/forums/pub...IR#>/boink.gif |
Originally Posted by vosko' date='Oct 4 2002, 07:11 PM
[quote name='jspecracer7' date='Oct 4 2002, 07:04 PM'][quote name='1Revvin7' date='Oct 3 2002, 05:40 AM'][quote name='jspecracer7' date='Sep 23 2002, 03:14 PM'][quote name='1Revvin7' date='Sep 24 2002, 12:08 PM'][quote name='Dont_Be_A_Rikki' date='Sep 23 2002, 02:56 PM']Drives shafts will hold for a while and the diff too. Just make sure you run slicks and dont use poppy street tires. Never dump the clutch on street tires dude.
start at 13psi or so on slicks and work your way down. IMO just my .02 cents -Rikki Yes, but he's got a VERY BEEFY driveline....clutch/TRANSMISSION/diff etc...[/quote] o yeah, i forgot.. https://www.nopistons.com/forums/pub...1047683894.gif hks dogmission[/quote] LOL...yeah....That's what I want. https://www.nopistons.com/forums/pub...IR#>/boink.gif[/quote] i want a greddy six speed for my FD...... https://www.nopistons.com/forums/pub...IR#>/boink.gif[/quote] me2 6 speed sequential :yum: |
All times are GMT -5. The time now is 06:28 AM. |
© 2024 MH Sub I, LLC dba Internet Brands