LOL



No seriously though



I have a black TII that has no engine but still has the whole TII driveline I was going to remove and use for myself, I don't have time anymore. Make me an offer on the whole car



I want the hood from it, unless your offer is interesting enough to make me leave the car just the way it is



FYI, the ECU is missing and I bought the car for cheap because all the wiring at the firewall side of the engine bay is cut. But look at the car, it's fine and comes with the whole TII driveline



Hell I was going to rebuild the motor but if you want the motor from it (which does have compression), offer me something for that too, it's on my engine stand.



FOR SALE REAL CHEAP, LIKE SERIOUSLY MAKE ME A VERY LOWBALL OFFER AND I'LL PROBABLY SAY OKAY COME GET IT



http://members.rogers.com/rx7/tii.jpg



I have a very pretty 6 port motor that lost 3 rear apex seals if anyone wants to haul it away. If you give me a crappy offer (aka free) then I'm keeping the polisher water pump housing, modded front cover, and powder coated oilpan. But



Otherwise it's dirt cheap. I need this stuff gone and the parts have value, and I will not hold anyone to the "RX7 Forums street value" of each part. I just want a bit of flash for the stuff I know is worth a decent amount.





I also have SHELVES AND SHELVES full of parts that I won't be using, this includes hard engine parts such as spare engine irons, front covers, stat gears, flywheels, all the way up to misc engine parts like BAC valves, 6 port actuators, intake manifolds, throttle bodies, and even body parts like taillights and stuff



I have alot of stuff that I have collected over the years that are about to collect dust: gentlemen my priorities in life have changed. Now is not the time to have 3 project FC3S. I need to buy equipment related to my business and any money that I can get my hands on to call my own will be saved for a house downpayment, not a new intercooler and T04E.



All of my RX7s are up for grabs make offers. Most notably the TII with the driveline. I dont think anyone is going to buy my black GXL so I will get rid of it on my own unless an offer comes up.



As for my garage full of parts, come take this stuff for dirt cheap or for free, before it gets thrown in the dumpster.



The clock is ticking

I should add I do not intend to get rid of my blue GXL right away, I want to redo the fuel injection setup and install my new ignition setup.



Although I will accept offers as is, depending on what the offer might be. But unfortunately guys this car I cannot accept lowball offers, I will accept something reasonable and then decide if it's fesable to sell.



Here's the engine bay:



http://members.rogers.com/rx7/overview.jpg



This is a 6 port engine (OEM shortblock) but everything else is no longer factory part for the longblock.











Oh yeah BTW I have a 12 lb light flywheel for the N/A driveline (and a spare S4 FC3S counterweight if anyone wants it), used for about 4,000 kms. Mint shape. I got a different pressure plate to suit the flywheel (thanks Roger E.) because of the plate style. It's from an RX4/REPU I am told. If you want to use it on an FC then take the pressure plate too, but this will bolt up to the 1st gen works with the stock pressure plate (with the appropriate counterweight for the 1st gen).

COLIN you know i wanted that t2!!!! hahah i know somw one that will take it!!!!!!!!!

Do you have an S5 thermoswitch?

Nah just about all of my stuff is S4, sorry Shawn





Noisemo at the TIME I wanted the TII for my own projects, but it's not justifyable anymore to keep it around and do the work.



If I could rewind the clock I would have given it to you back then buddy lol

yo im down for the t2 colin, let me knwo how much, pm me or email me:

teknicsiny2g@aol.com



kevin.

How much for the NA flywheel? I have an 86 GXL I'm converting to S4 TII, but the NA has the RB carb--I'm rebuilding as a full race engine with a different chassis. The flywheel would be awesome, and any other rebuild parts.



Thanks.

-M

sent ya a pm

Pm Sent.

Replied to all PMs





Whoever wants that TII better jump on it fast, there is alot of interest for it!!!

colin just an fyi almost is my buddy interested in the T2 and if he buys it you'd better thrown in a spare set of 4 piston calipers https://www.nopistons.com/forums/pub...DIR#>/wink.png

have any 12a stuff?

almost put a cheque in the mail today expresspost for the TII





CONSIDER THE TII SOLD (PENDING ARRIVAL OF DOCS)

check your pm

Hey yo!



You didn't answer my PM... You gotta send me your address if you want me to come get parts...

Colin call me on my cell

check your p.m.

sean

Do you have any t04e's or wastegates laying around?



Or a wideband 02 sensor?



Milk in a bag?

colin hope the money order it made it to you today the tracking number says its at the post office there



thanks

Post office is never open when I'm around https://www.nopistons.com/forums/pub..._DIR#>/sad.png



I have the piece of paper telling me there's money for me at the post office though!

Just for reference my black GXL's for sale too and it's engine bay looks like this



https://www.nopistons.com/forums/upl...1081230893.jpg

Money order verified



<span style='font-size:17pt;line-height:100%'>1987 TII SOLD to 'almost' aka Luke</span>



I still have lots of stuff for sale guys, two whole other RX7s, lol...

<span style='font-size:17pt;line-height:100%'>1986 GXL (black) SOLD to JOE</span>



Got lots of parts left



TII motor

N/A Transmission

Blown 6p motor

Front clip from a 1991 protege GT (1.8L DOHC 16v)



just off the top of my head

what year 6 port engine?

S5 N/A rotors??

i asked first!!!!!!!!!

baloney!

oscar meyer

NO S5 STUFF

Hey Colin,



I just tripped over this thread. Are you getting out of that garage in Paris? If you do need a bit of storage space, I may be able to help you out. No parts cars, shells, or the like, but smaller stuff would be OK. You know how it is... Also, if you do happen to still have that TII downpipe we talked about a while back, that'd be great.



All the best in your business venture. Drop me a business card some time, and I'll pass your name along.



Roger.

Do you have an ABS sensor for the rear drivers side disc?



Spike

I got rid of pretty much everything, I have my blue RX7 which I don't intend to sell until I finalize the engine wiring, and misc S4 engine parts (TII and N/A)



No chassis parts