NoPistons -Mazda Rx7 & Rx8 Rotary Forum

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)
-   3rd Generation Specific (https://www.nopistons.com/3rd-generation-specific-18/)
-   -   Yet Another Clutch Problem... (https://www.nopistons.com/3rd-generation-specific-18/yet-another-clutch-problem-39468/)

twyatt 05-25-2004 07:24 PM

Ok, I was driving the other day and at a stop light I put the clutch pedal down, put the car in first and the friction point on the release of the pedal was almost at the floor. I pulled into a parking lot and the pedal went down and stayed down. I could pull it back up with my foot and it would spring back. I drove home with no problems. Drove it again today and the problem is back. Bigger and badder than before. It seems to be worse in reverse and sometimes in 1st gear. Anyone else had this problem or know what could be causing it?



Thanks!



Tripp

nopistons94 05-25-2004 07:26 PM

dude its the exact same thing as my thread below yours, but mine always does it lol

twyatt 05-25-2004 07:28 PM

Yeah, it definitly seems similar in behavior.

nopistons94 05-25-2004 07:35 PM

do you know how to bleed the clutch ? sounds like thats all you need to do, have you replaced or bled any brake related items at all ?

twyatt 05-25-2004 07:52 PM

I replaced my rotors recently.

I have the shop manual for the car but I cannot find the damn bleed valve for the clutch.

nopistons94 05-25-2004 08:07 PM

go under the car, look at the trans bell housing, look to the drivers side you'll see a black cylinder , you'll see a bleeder vlave on the end, its above the starter


All times are GMT -5. The time now is 04:30 AM.


© 2024 MH Sub I, LLC dba Internet Brands