NoPistons -Mazda Rx7 & Rx8 Rotary Forum

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)
-   3rd Generation Specific (https://www.nopistons.com/3rd-generation-specific-18/)
-   -   XS POWER SMIC INSTALL(with pics) (https://www.nopistons.com/3rd-generation-specific-18/xs-power-smic-install-pics-75633/)

Maxmumboom 07-02-2011 10:20 AM

This is my first post on here. I recently picked up a 93 Montego Blue Touring. Ive been doing alot of needed maint. and repairs in the last month. While I was under the hood, I decided I needed to replace the intercooler. I thought that the factory IC just wasnt doing it. The rubber piping was starting to go and it just made sense to replace it to support the other mods of the car.

I was going to do a write up on a how to, but its really not needed. The SMIC is almost Identical to the Pettit SMIC in dimensions. Hence the reason why I bought it. Here are the links to the install pics:



http://s140.photobuc.../r9/maxmumboom/



Here are the list of mods at 60k miles.: APEXI Power FC ECU, Full Blitx 90mm turbo back exhaust, XS power SMIC, Air pump delete, Under drive pulleys, APEXI intakes, AEM UEGO(AFR), Boost guage, VOLK Daytona 17x9 wheels, eibach springs, and a Greddy strut tower bar.

thatpoorguy 07-02-2011 02:29 PM

Very nice! Going to do the fuel system and radiator next?

Signal 2 07-02-2011 10:40 PM

Sounds great. I've heard those intercoolers are a good bang for the buck. But they're only as good as the duct. Are you going to get Pettit's duct?

If you keep it at near stock boost you won't need fuel immediately. But I agree with poorguy on the cooling and an aftermarket radiator would be a priority.

You also might want to check the turbo coolant hoses if you haven't already. Even at 60k they can get puffy and weak. They aren't expensive.



As a side note, personally I would have gone with an idler pulley to replace the airpump and avoided the under-drive set. They have more issues than I like.

Maxmumboom 07-04-2011 06:45 PM


Originally Posted by Signal 2 (Post 849145)
Sounds great. I've heard those intercoolers are a good bang for the buck. But they're only as good as the duct. Are you going to get Pettit's duct?

If you keep it at near stock boost you won't need fuel immediately. But I agree with poorguy on the cooling and an aftermarket radiator would be a priority.

You also might want to check the turbo coolant hoses if you haven't already. Even at 60k they can get puffy and weak. They aren't expensive.



As a side note, personally I would have gone with an idler pulley to replace the airpump and avoided the under-drive set. They have more issues than I like.


myfonti 12-13-2011 01:04 AM

wow! nice install! i am thinking of getting the same intercooler! any fitment issues? is the stock duct helping? have you gotten the pettit duct yet?


All times are GMT -5. The time now is 10:56 PM.


© 2024 MH Sub I, LLC dba Internet Brands