I've got my engine out of the car, prepping it to send out for a rebuild/streetport. i've got the UIM and LIM off, just basically wondering what solenoids and check valves i can remove. i wanted to keep all my 'stock twin' stuff organized incase any of my friends need some parts. i'll try and get a picture of the engine so far to help with the descriptions.



Jimmy

THEY ALL COME OFF!!!!!!! you are using an aftermarket boost controller and fuel pressure regulator with the new setup right?

you should leave the checkvalve on the mapsensor. and the PCV system, the rest is history

What Turbo did you get Jimmy?

yeah, i already have a profec-b, and i plan on doing the fuel and turbo when i get my new engine.



PCV=pressure control valve?

Positive Crankcase Ventilation



There will be a hose coming off the oil filler pipe. then the pcv valve inline, then a hose to the intake manifold

dave - haven't gotten a turbo yet, still can't decide between a to4r, gt35/40, or an rx-6. needless to say my car's gonna be off the streets for a while



jay - that line comes off the side of the filler neck, with about ~4 inches of hose to the manifold with a gray valve in the middle, right? thanks

yeah thats the one https://www.nopistons.com/forums/pub...IR#>/smile.png

t-04R... https://www.nopistons.com/forums/pub...IR#>/bigok.gif

I just ordered a GT35/40 kit form Aspec myself.



I can't wait till it get s here.

[QUOTE] still can't decide between a to4r, gt35/40, or an rx-6.[QUOTE]

Just get a T-88 https://www.nopistons.com/forums/pub...1047683894.gif

you have to boost the **** out of a T-88 to get good horsepower...or put it on a bridgeport.

BP t-88 soon here!

t-04R... https://www.nopistons.com/forums/pub...IR#>/bigok.gif [/quote]

Just got mine!!



YEE HAW

t04r you will be happy https://www.nopistons.com/forums/pub...#>/BURNOUT.gif

I hope so!!!