NoPistons -Mazda Rx7 & Rx8 Rotary Forum

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)
-   3rd Generation Specific (https://www.nopistons.com/3rd-generation-specific-18/)
-   -   Vacuum Problem Please Help (https://www.nopistons.com/3rd-generation-specific-18/vacuum-problem-please-help-42159/)

ponch94rx7 12-23-2004 07:53 PM

Okay everybody here is the problem. I have a 1994 rx7, with the power FC, HKS SSQ BOV, Apexi intake, and HKS titanium exhaust. Ok the hose to my stock BOV was not connected ( the little hose not the big one) and I was leaking boost on both turbos. The first one wasn’t as bad as the second turbo. The second one felt like it wasn’t even boosting. So I got a silicon hose kit and replaced the hoses that went to the BOV’s and a couple of other ones. Then I put all the stuff back on. Ok now the car is running like ****, the air pump keeps turning on and off, and it sounds like it is being suffocated. Sometimes it just dies. And I don’t have the stock hood so I cant look at the vacuum diagram to see if I hooked something up wrong. If anybody might know what the problem is, please feel free to let me know. Or if you guys know a web site to print out a vacuum diagram, hook me up…

GreyGT-C 12-23-2004 09:28 PM

factory service manual can be downloaded at www.iluvmyrx7.com it has the diagram in it..





did you have the upper intake manifold off? If so... make sure you hooked the MAP sensor back up...

GreyGT-C 12-23-2004 09:29 PM

also.... www.robrobinette.com and www.scuderiaciriani.com have lots of good stuff there too.

ponch94rx7 12-23-2004 10:39 PM

ye the map sensor is all good

Fd3BOOST 12-23-2004 10:56 PM

The hoses are not right. You will have to double check them all.



Pretty good pix here, navigate to the how to, and then vac hose job.



http://rx7.voodoobox.net/

qwester007 12-24-2004 01:13 AM

Problem #1-



Ditch the airpump

dgeesaman 12-24-2004 10:39 AM

Print this one out in color and use it:



http://web.newsguy.com/geesaman/93va...lor.edited.jpg



Dave

ponch94rx7 12-24-2004 11:29 AM

why ditch the air pump? dont I need that

ponch94rx7 12-24-2004 11:37 AM


Originally Posted by dgeesaman' date='Dec 24 2004, 08:39 AM

thanks, that diagram helps alot, but I checked and i have them all hooked up corectly. the only hoses that i changed is the lil hose to the blow-off-valve and the lil hose to the charge relief valve. man i cant figure this one out? https://www.nopistons.com/forums/pub...1047683358.gif


All times are GMT -5. The time now is 05:12 PM.


© 2024 MH Sub I, LLC dba Internet Brands