NoPistons -Mazda Rx7 & Rx8 Rotary Forum - Things to know/learn before purchasing an FD?

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)

- 3rd Generation Specific (https://www.nopistons.com/3rd-generation-specific-18/)

- - Things to know/learn before purchasing an FD? (https://www.nopistons.com/3rd-generation-specific-18/things-know-learn-before-purchasing-fd-54998/)

you should be fine man, I don't see anything wrong with that at all

You'll be fine. Anything past that and you may blow your motor on a cold day from boost spikes etc.

Quote:

Originally Posted by Dueled' post='779303' date='Nov 17 2005, 02:29 PM

No mid pipe.

Fluidyne radiator

Tri-Point Intake (seperates intake airflow from intercooler)

Tri-Point aluminum AST

Tri-Point silicon vacumme hose kit (installed by them)

Samco 4" hoses with the big clamps from the Y-Pipe to the engine

Downpipe (heat-tape wrapped)

R-Speed(?) Can type catback with silencer installed

You will NOT need to modify fuel with those mods. If you want to add an intercooler or Mid-Pipe, you will mostlikely need a larger pump and secondary injectors, to consistantly supply your engine with the increased fuel required by the now higher boost. Or, you can take the turbos off and port the hell out of the wastegate. The latter does cost the same as moding the fuel and doesnt add any power, so go with the former.

*remember to carry a baseball bat in the hatch at all times to hit yourself with incase of problems.