hey every1,

how the hell do u wire open the TCA door with the turbos on the car?! I cant even find the thing half the time. Any suggestions/pics?



-Zach

o yea, and i broke off the right nipple on the little elbow that is on the primary turbo....was that going to nethig important?

you HAVE to pull the turbos off the car to do non-seq.



and you can plug that one nipple, and use the other for your oil injectors.

well, ****...arent pulling off the turbos a BITCH to do? Anybody got another suggestion or is there raelly no way around this one?

anyone?

you dont need the pull the turbos to go non seq...



do a search for "dont be a rikki" on this forum or www.rx7club.com





all you do, is remove the TCA, plug the two lines. You can see what you need to wire because the part your wiring is connected to an actuator (The TCA).



Get some coat hanger and wire that fucker up. You also have to do some work w/ the hoses but overall its an easy operation.



I can help you out if you want with the poormans job. It will let you see what non seq is like but nothing permanant incase you want to go back to sequential. If you like non seq, you can do what im doing and do the full monty. Block off plates, cut out that door that you will have to wire up initially, weld ****.



Peace

oh... and if you ever find the tca, which is on the bottom of the car... if your laying underneath the car, top of your head facing the rear of the car, the tca will be on the right side, to the right of the oil pan.. might have to look around a bit, also might be hidden by a heat sheild... I would be wise to unhook the rod that is connected to the door so you can wire it open =)

yea, had to take off two heatshields but from there it was a piece of cake to take off and wire open! thanks to all who helped out

i keep everything on the car. rikki's is how i did mine.



strong cloths hanger wire holds the door open.

ur welcome man

dude when did you do that? https://www.nopistons.com/forums/pub...R#>/unsure.png was it after i left that night? howd you fix that......cant wait til we get it running again

yea that was after u left my house man. LOL...i just put a nice big drop of silicone on it and it *should* seal it up nicely

Be careful that the silicone doesnt get sucked thru the hole and into the primary turbo!!! You might be safer putting a bolt or something in there..