Just installed the kit. Main-WP-Alt

Shipped with the wrong set of belts.



FYI IMHO.

The WP was designed wrong. The bevel was done with a conservative angle not considering the oem coolant hose and clamp for clearance.

The clamp right now sits at the bottom point of contact between the hose and clamp......only half of the clamp is providing pressure ...this concerns me....this gives me a clearance of paper thickness..no exaggeration...



Contemplating on returning them..anyone have any solutions...cable ties ?



Ordered the samco coolant hoses....if i recall correctly, they are thicker than the oem hoses....which i know will definitely NOT work with this pulley kit...

a combination of slight twisting of the hose and readjustment of the clamp provided for a hairline gap...it wasnt enough to make me feel at ease so i filed a portion of the clamp to create a little more security...

thanks for all the replies....

that sucks. i'm using the greddy pulley kit that came with my T78 kit. i'm not a big fan of pullies. i think the $$$ can be better spent on other things https://www.nopistons.com/forums/pub...DIR#>/wink.png

Every bit helps. https://www.nopistons.com/forums/pub...DIR#>/wink.png

their claim of 8hp seems realistic in comparison with some of the other claims i have seen posted by others on this mod alone...

ill find out soon enough...pfc tuning with my new mods for bbr1 coming up...cymr1 to follow the next week...

while my TII is down i figure might as well upgrade it a *little* https://www.nopistons.com/forums/pub...1047683785.gif

The RB pulley is nice because it has alot of marks, including one for TDC.