Like the title says, I know the website say's 500hp @ 36-40 psi. I don't think this can be true, Anyone have any experance with this pump? I am running 2 walbro's, just wondering?

that pump is the toyota supra pump, with the part# scratched off!!

I remember hearing that, but what hp #'s?

500 whp is a safe # if you upgrade the stock wiring. it gets iffy after that. i am going to hook up a second one.

Also, from what I've been hearing lately when you change out the stock wire setup so the pump will get more current and flow more it kills the lifespan of the pump. I've heard of Supra pumps killing over in less than 10K miles after the voltage was bumped up.



In addition at the stock voltage the high flow Walbro flows more than the Supra pump.



STEPHEN

THANKS

I'm running that pump with my A'pexi RX6 setup and 1600cc secondaries with no problems. Then again, I'm well under 500 hp right now...

Simply untrue.

Check out these two pages for more information.

Here! and Here!

So this is the pump then (Denso 260 LPH Supra Pump) and flow rates?

Todd, just do a dual walboro fuel pump setup. If IGY with twin T-04S and Chris with a 20B have no problems with fuel, I'm sure your T-88 won't have problems either https://www.nopistons.com/forums/pub...IR#>/boink.gif