Well... Got that done... pic is old, but all the wires are cut and re-attached and hidden... OEM style. I used a dampening bolt (Lack of proper term I'm sure...) 10mm on the bottom, rubber in the middle and 10mm on the top... https://www.nopistons.com/forums/pub...IR#>/smile.png to secure the aluminum bracket up off the framerail to allow the wires to pass underneath.. The box is a perfect snug fit.

Here's the bolt. (Originally from the radiator I think LOL)

I should do that too...



Even though i dont need too, My FMIC will allow me to keep it if i would like to.

FMIC? What did you get?

Yeah nice work, nice and clean.

can you do a how to "relocate fuse box" i think i might wanna do this before i mount my horizontal mount intercooler





very nice and clean set up

I am 'getting' Van's FEED 4 core...when he gets the sucker out https://www.nopistons.com/forums/pub...IR#>/bigok.gif

I can probably do that... It's REALLY easy.



All you do is unbolt the fusebox, unsecure the wires from under the bumber support and unwrap them. Then you need to cut the 3 wires (Forget the colors) that run to the passenger side. The rest you can just pull to the other side while attached to the fusebox. I shortened them so I wouldnt have to stuff them up in the bumper... It's really just a matter of cutting and resoldering the wires. I'll get more pics when I get the chance.



All I did for the bracket is used a piece of aluminum from Home Depot and bent it with a vice and a hammer to have a 2" space in the middle to hole the box.. SIMPLE. Took like 10 minutes.. Then I polished it. https://www.nopistons.com/forums/pub...IR#>/smile.png



I'll get some pics when I get home... https://www.nopistons.com/forums/pub...IR#>/bigok.gif

sounds easy enough..... originally iwas just gunna mount it under the bumper support and just forget about it for a good while. hehe

looks good man. I'm glad the project is coming along nicely. Hope to see it running soon https://www.nopistons.com/forums/pub...IR#>/smile.png

Dude.. You need to come help me do the clutch sometime!!!

yah that looks clean

Give me a call when you need me. I can be there in 20 min https://www.nopistons.com/forums/pub...IR#>/smile.png You still have my number, don't you?

One word, NEAT.

looks great! thanks for the new project

https://www.nopistons.com/forums/pub...>/bigthumb.gif

I have some new pics... After I reconnected the wires... Lemme get some work done, and I'll post them! https://www.nopistons.com/forums/pub...IR#>/smile.png

did you have to relocate your battery?

if not how did you fit it in there?

what do you do with the three wires on the passenger side?

thanks man

My battery is in the passenger bin... A smaller battery WILL fit I'm sure... But any use of the stock battery tray will have to have a work around because this bolts to the hole that mounts the OEM battery box. For the wires that you cant pull over to the driver side, just extend them with some other wire. make sure to label them as you go so you DONT mix them up! https://www.nopistons.com/forums/pub...IR#>/smile.png



You know... I'll have to look, but now that I think about it... The wires that don't run over MIGHT be the ones to the fuggin air pump relay... (No use for me!) I'll check later... Lemme grab the camera and post the pics I promised earlier. https://www.nopistons.com/forums/pub...IR#>/smile.png



J

...

Yeah looks real clean sitting there. man... some people have WAY to much time on their hands. https://www.nopistons.com/forums/pub...DIR#>/wink.png

https://www.nopistons.com/forums/pub...IR#>/bigok.gif



Thanks for the compliments Keith!!