http://www.vosko.net/photos/actflywheel/DSC00018.JPG

http://www.vosko.net/photos/actflywheel/DSC00019.JPG



gonna see if i can get it warrantied today. if not i am ordering a new clutch kit today!

Ouch, looks like someone installed a new clutch without turning the flywheel



What ever you do dont admit to that if its true. Most all clutch companies have in the warranty that its only covered if you turned the flywheel.



But from what I've been told they can tell if you turned it or not when they inspect it. Brian (from BNR) has a friend that own a company that builds clutches (SPEC clutches) and he's the one that told me that.



STEPHEN

my flywheel was turned. i had no first gear so i used second gear to race and do burnouts with the 4 puck... it did that LOL

Racing and burnout from a stand still in 2nd gear huh lol



Ok well....no comment



HaHa

well it says good to 544LB FT of torque. i only have half that. it shouldn't have warped!

yah thats hammered



mike

Ouch. That's damn near funny!

act and sr just got email with the pix https://www.nopistons.com/forums/pub...DIR#>/wink.png



lets see what happens!

Watch you'll get ******* sponsorship out of this and I'll be pissed :twisted:

well i talked to the judge and he recommended i get a special order version. once i talk to him again to make sure its the right one. the clutch setup i'm getting is the same one that's in a 8 second 700rwhp rotary car https://www.nopistons.com/forums/pub...#>/biggrin.png

damn.. https://www.nopistons.com/forums/pub...#>/biggrin.png

that would be pressure plate not flywheel, and I think that it was fine till you put it on top of that issue of sport compact, the evil honda forces creeped into the metal and caused havok LOL

Damn.. I didn't even catch that one.Those damn hondas.. :twisted:

is that the way it was when it was removed or did someone take a rotary tool to it to clean it up with like an abrasive disc or something?

I tried to turn my stock flywheel when I was replacing my clutch and it was a 2 step flywheel but the burns went deep into the first step, I actually got it down to a negative step and I still couldn't get the burns out. So I had to order a new one. I just kept going as far as I could. Mine was pretty fucked. Also, I noticed that too that we were all looking at a pressure plate. I can't believe it took so long for someone to mention it. Congrats Vosko, you can damage things beyond others belief. Way to go. Post some pics of your blown up trannies. I want to see one. https://www.nopistons.com/forums/pub...#>/biggrin.png

ito cleaned up the pressure plate to see if it was warped. there is no way ACT will warrantee that plate LOL

ahh, see thats what makes it look so nasty, i cant really tell the warpage from this angle, just all the junk from the cleaning attempt.

yeah you can't tell the warpage but you can tell its fucked up https://www.nopistons.com/forums/pub...DIR#>/wink.png