I fixed one that broke at the main joint and it held for several months before I replaced it.
1. I applied some glue to the broken joint and reseated the parts on the car to retain the proper position. 2. I cut some thin aluminum flashing and formed/bent it over the glued joint. I kinda bent it like this: _/\_. 3. The metal should be as close to the plastic as possible. I slathered epoxy around it and let it cure. 4. Reinstall it but you still must be careful. BTW: I 've had them snap and blow right off. They cost $75 and it is another $75 to paint by code. |
All times are GMT -5. The time now is 08:59 PM. |
© 2024 MH Sub I, LLC dba Internet Brands