Passenger Doorlock doesn't lock when locking from driverside lock.
#1
Senior Member
Thread Starter
Join Date: Apr 2002
Location: Was: Cincinnati,OH.... NOW: Bham, AL
Posts: 632
Alright guys..
Let see how many of you know your stuff.
My passenger door lock used to work.. It used to unlock from drivers side locking mechanism and now, it does nothing. I do hear a solenoid clicking.. but nothing.. Door lock mechanism works fine and no resistance.
I've checked all the fuses and wiring. All seems to be ok..
Anyone have a suggestion to check?? How about replacing the passenger side locking solenoid?? I have a spare passenger door that I could take out, but seems like its a pain in the *** to take out.
Any comments, suggestions, or advice will be greatly appreciated it.
PHIL
Let see how many of you know your stuff.
My passenger door lock used to work.. It used to unlock from drivers side locking mechanism and now, it does nothing. I do hear a solenoid clicking.. but nothing.. Door lock mechanism works fine and no resistance.
I've checked all the fuses and wiring. All seems to be ok..
Anyone have a suggestion to check?? How about replacing the passenger side locking solenoid?? I have a spare passenger door that I could take out, but seems like its a pain in the *** to take out.
Any comments, suggestions, or advice will be greatly appreciated it.
PHIL
#2
Senior Member
Join Date: Mar 2003
Location: Disclaimer: posts made after 11AM are most likely alcohol induced. Please disregard unless very funn
Posts: 2,436
so you hear a clicking from the passenger side when you actuate the drivers side unlock button? If so, it means (most likeyly) that the passenger side is either binding or the rod assembly has come unattached, i suppose it could mean that the acuator is weak also and doesn't have enough *** to move it........ remove the passenger side door panel and see if the rods move when you actuate the drivers side assembly. Let us know what you find ..
#3
Senior Member
Thread Starter
Join Date: Apr 2002
Location: Was: Cincinnati,OH.... NOW: Bham, AL
Posts: 632
Originally Posted by GreyGT-C' post='824425' date='Jun 15 2006, 04:14 PM
so you hear a clicking from the passenger side when you actuate the drivers side unlock button? If so, it means (most likeyly) that the passenger side is either binding or the rod assembly has come unattached, i suppose it could mean that the acuator is weak also and doesn't have enough *** to move it........ remove the passenger side door panel and see if the rods move when you actuate the drivers side assembly. Let us know what you find ..
The Grey,
I did try that but it looks like I'm not getting enough power to the actuators. Initially, it moved the rod a little and sometime locked the doors. but now, nothing.. just a short clicking noise and thats it.
I guess I'll try to replace the actuator assmebly. It just seems like a pain in the ***!
#4
Originally Posted by herblenny' post='824524' date='Jun 16 2006, 05:08 AM
The Grey,
I did try that but it looks like I'm not getting enough power to the actuators. Initially, it moved the rod a little and sometime locked the doors. but now, nothing.. just a short clicking noise and thats it.
I guess I'll try to replace the actuator assmebly. It just seems like a pain in the ***!
Greetings Phil,
It does sound like the actuator is weak. I have not experienced it with my Mazdas, but replaced many a Saturn actuator solenoid for the same thing. Replacement would be what I'd be doing now.
Regards,
Mike
#5
Phil,
It sounds and looks like it would just be easier to put the whole spare passenger side door on and paint it the color of the FD that this has happened to, rather than mess with those actuators
It sounds and looks like it would just be easier to put the whole spare passenger side door on and paint it the color of the FD that this has happened to, rather than mess with those actuators
#7
Senior Member
Thread Starter
Join Date: Apr 2002
Location: Was: Cincinnati,OH.... NOW: Bham, AL
Posts: 632
Brad,
I would, except, I had the hardest time trying to match the paint. And its still not 100% match (more like 95%).
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)