Well im in the process of unwrapping my crispy wiring harness to get rid of the wires i dont need for single conversion. Should i just yank the wires that went to the rats nest out or cut them and tape off?? Do i have to keep any solenoids?

What are you using for engine management? If your using a stand alone like pfc or haltec or something then yea you can cut the extra stuff off off the harness. If your using the stock ecu with a piggy back or something and cut the harness your likely to get a check engine light. You don't need any of the solenoids from the rats nest.

I NEVER cut- only tape off.

agreed, you can tape everything up and it will still look clean. (if you do a good job).

im gonna go pfc. now to get all my monkeys in a barrel. the lines i need are

oil lines t'd together to intake

fpr line to firewall side nipple on uim

line to bov

line from uim to oil fill thingy

map to uim

y-pipe to lim under injectors

im gonna use the stock twins till they die...

no guts, no glory.

https://www.nopistons.com/forums/pub...R#>/tongue.png