Sup guys...



just finished doing non-seq on my car and well run into a couple of problems.



#1. i'm running the base map on a PFC

#2. when i started the car up the 1st time it ran like a champ at 800rpms for a little bit then i started hearing some sounds.

#3. sounds seem like they are coming from the turbo area..

#4. I smell fuel coming from under the UIM.. so i'm sure some injectors aren't seated right or something.. The FPD is brand new as well.





Now the car doesn't want to idle on its own at all.. and has problems starting.. like its flooded.. also as well, the watertemp doesn't show any change, its hooked up to the sensor, but the temp guage goes to op temp..



any one have any ideas..?? https://www.nopistons.com/forums/pub...1047683561.gif

If it was all working fine before you did the mod, you should go back and double check all you work.

I can't tell what happened from the symptoms you mention but common sense would say to trace your steps backward.

sorry

yah its just weird since it was running fine before i worked on it.



just i think maybe the fuel injectors arent' seated right causing flooding and vacuum leak... making it idle poorly. i can smell fuel from under the UIM. but the sounds coming by the turbos is kinda metallic sounding or something.. I won't have time to work on it til next week.. hopefully it will be all good to go. just gotta check everything again.. just too cold and rainy here.