NoPistons -Mazda Rx7 & Rx8 Rotary Forum

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)
-   3rd Generation Specific (https://www.nopistons.com/3rd-generation-specific-18/)
-   -   Intercooler Pipe (https://www.nopistons.com/3rd-generation-specific-18/intercooler-pipe-25241/)

BoOsTin FD 09-22-2003 07:51 PM

1 Attachment(s)
Ok basically i need this pipe. I have a pfs intercooler that has the inlet Ic pipe cut. the one that goes from the y-pipe. So, my intercooler looks similar to this one. This also looks perfect because it eliminates the black stock y-pipe pipe.



So, can anyone please tell me where can i get it and how much? I know i've seen it on the couple of the cars, so i think someone must know who makes them and stuff.



Thanks

turbovr6 09-22-2003 08:05 PM

any decent exhaust shop can make one

BoOsTin FD 09-22-2003 08:55 PM

really? Well i know i tried a few, and they all told me it's hard to make that 90 degrees bend. When they try to bend it the pipe ends up being 2 inches :(

Fd3BOOST 09-22-2003 08:56 PM

Yea get an exhaust shop to make you one, or buy the M2 pipe in the pic used from someone.

BTW its replacing the crossover pipe. not the Y pipe pipe. https://www.nopistons.com/forums/pub...DIR

turbovr6 09-22-2003 08:57 PM

you need to find an exhaust shop that has a "mandrel bending machine" not all shops have them. With that machine you get nice smooth bends that stay the same size throughout

BoOsTin FD 09-22-2003 09:00 PM


Originally Posted by Fd3BOOST' date='Sep 22 2003, 07:56 PM
Yea get an exhaust shop to make you one, or buy the M2 pipe in the pic used from someone.

BTW its replacing the crossover pipe. not the Y pipe pipe. https://www.nopistons.com/forums/pub...DIR#>/wink.png

https://www.nopistons.com/forums/pub...1047683785.gif sorry, i know it had a name but i couldn't remember when i was writing https://www.nopistons.com/forums/pub...IR#>/blush.png

9BASE3 09-22-2003 09:01 PM

We can get pre-made bends at the Green Store (Don't ask)



Then we just get them welded. I'll take you there sometime this week or next if you like. https://www.nopistons.com/forums/pub...IR#>/smile.png

BoOsTin FD 09-22-2003 09:01 PM

so that pipe is actually m2 pipe? Do they sell it by itself or it only comes with IC?

9BASE3 09-22-2003 09:02 PM


Originally Posted by BoOsTin FD' date='Sep 22 2003, 08:01 PM
so that pipe is actually m2 pipe? Do they sell it by itself or it only comes with IC?

That pipe comes with the M2 intercooler kit. You MIGHT be able to get it from M2, but I can assure you it'll cost you. AND TAKE FOREVER TO GET... LOL



I'll check the store to see if I can get the 90 bends... https://www.nopistons.com/forums/pub...IR#>/smile.png

Fd3BOOST 09-22-2003 09:02 PM


Originally Posted by BoOsTin FD' date='Sep 22 2003, 06:00 PM
[quote name='Fd3BOOST' date='Sep 22 2003, 07:56 PM'] Yea get an exhaust shop to make you one, or buy the M2 pipe in the pic used from someone.

BTW its replacing the crossover pipe. not the Y pipe pipe. https://www.nopistons.com/forums/pub...DIR#>/wink.png

https://www.nopistons.com/forums/pub...1047683785.gif sorry, i know it had a name but i couldn't remember when i was writing https://www.nopistons.com/forums/pub...IR#>/blush.png [/quote]

I think im gonna use that one if you dont mind.



Y pipe pipe. https://www.nopistons.com/forums/pub...1047683785.gif

TYSON 09-22-2003 09:05 PM

I don't know what happened to mine or I would get it too you. I'll look for it though.

BoOsTin FD 09-22-2003 09:07 PM


Originally Posted by TYSON' date='Sep 22 2003, 08:05 PM
I don't know what happened to mine or I would get it too you. I'll look for it though.

please do https://www.nopistons.com/forums/pub...#>/biggrin.png

BoOsTin FD 09-22-2003 09:08 PM


Originally Posted by 9BASE3' date='Sep 22 2003, 08:01 PM
We can get pre-made bends at the Green Store (Don't ask)



Then we just get them welded. I'll take you there sometime this week or next if you like. https://www.nopistons.com/forums/pub...IR#>/smile.png

What store are you talking about? I would like to go. When are you off?

9BASE3 09-22-2003 09:12 PM


Originally Posted by BoOsTin FD' date='Sep 22 2003, 08:08 PM
[quote name='9BASE3' date='Sep 22 2003, 08:01 PM'] We can get pre-made bends at the Green Store (Don't ask)



Then we just get them welded. I'll take you there sometime this week or next if you like. https://www.nopistons.com/forums/pub...IR#>/smile.png

What store are you talking about? I would like to go. When are you off? [/quote]

I'm off this weekend.... I have to go by there sometime this week... But I'm at school so I'll just have to swing by there...



It's some little hole in the wall parts store that just happens to have friggin everything!!

BoOsTin FD 09-22-2003 09:14 PM

So saturday? I'll give you a call saturday around 11 or so.

Let me know if it's ok with you https://www.nopistons.com/forums/pub...IR#>/smile.png

MazdaMike 09-22-2003 09:25 PM

funny i always just called it the cheap plastic pipe that breaks a lot and should have been aluminum.... or "the ugly pipe"


All times are GMT -5. The time now is 06:09 PM.


© 2024 MH Sub I, LLC dba Internet Brands